PDA

View Full Version : Diff flip



Scottygreg
11-05-2014, 04:28 PM
Hi all,

I am pretty keen to lower my caddy but because I have the newer tsi and don't have a leaf pack I can't just get the pack reset. The kits you buy with the diff flip seem to be the only option. It is illegal in qld isn't it ? Is there any safety issues ?

Cheers

fmflex
23-06-2014, 01:24 AM
Regarding legality, I thought any modification for aesthetics in qld was illegal. I'm down in vic myself though the rear end of my air bag setup came from qld with the axle requiring the flip in order to have the clearance to hold the airbag.

jorgocaddy
19-08-2014, 11:04 PM
Anyone found an Aussie seller for the diff flip kit?

fmflex
20-08-2014, 12:38 AM
Maybe, PM me

Scottygreg
26-08-2014, 08:26 PM
Darkside has a kit for this application. Any one used it ?

Scottygreg
26-08-2014, 08:28 PM
Fmflex, does the caddy still feel solid with your flip ?

fmflex
26-08-2014, 09:46 PM
Solid in what way?

Mine's bagged all round so may not be a fair comparison. But to compare to my previous setup of pedders mk5 golf lowered front struts and springs and the rear leaf spring reset it rides heaps nicer. Mine's a trade vehicle so carries a fair amount of weight.

Candyvan
05-11-2014, 07:09 PM
So mk5 golf front struts same as mk3 2005 caddy?

fmflex
05-11-2014, 09:10 PM
Yes they're interchangable

wai
06-11-2014, 05:58 AM
Hi all,

I am pretty keen to lower my caddy but because I have the newer tsi and don't have a leaf pack I can't just get the pack reset. The kits you buy with the diff flip seem to be the only option. It is illegal in qld isn't it ? Is there any safety issues ?

Cheers

On the legality, you have to make sure that you have a minimum ground clearance at any point under the vehicle after the change. Also, you have to have a minimum bump stop clearance. There is also clearance to bodywork that has to be considered. Lastly, you have to make sure that the front and rear are lowered the same amount, otherwise this changes the castor angle and this can affect high speed steering stability.

Superior
24-11-2014, 07:11 PM
I have the Darkside flip kit (Superlow).. I have to have it set 2 notches from the highest setting and even then my axle hits on the bumpstops (bumpstops are already cut down to about 1.5").. It can go 3 notches lower, i have no idea how as mine are almost on the bumpstops. I wouldnt cut the bumpstops any further as the metal around the bumpstop hits on the axle bolts and loosens the bumpstops (unless you get shorter bolts).

13248
13249

fmflex
24-11-2014, 09:55 PM
Hi Superior

You looking at bagging your van too?

Superior
25-11-2014, 05:12 AM
Yeah installing an AccuAir E-Level Kit in 2 weeks time :)

fmflex
25-11-2014, 10:00 PM
Nicely done :cool:

Good to see another bagged caddy around the traps

Take care. :drinkbeer: