MK4 Poly Bush Dog bone inserts

[h100vw]

http://www.vwwatercooled.com.au/forums/images/imported/2013/07/IMAG1485_zps6a1721e9-1.jpg (http://s40.photobucket.com/user/h100vw/media/IMAG1485_zps6a1721e9.jpg.html)

Easy bolt in job

2 Sets of Polybush Pack Front Engine Mount Dogbone - no Vibes! Golf Mk4 Platform > Bushes > Suspension > Golf Mk4 1998-2004 > VW Golf > VW Specialists > PSI Tuning - VW Specialists $49.50 plus shipping $10

Golf Mk4 - VW - Polybush (http://www.polybush.co.uk/shop/vw/golf-mk4) 44CN


Gavin

edited

[dylan8]

How are the poly bush? Harsh?

[h100vw]

How are the poly bush? Harsh?

This is the lower shore of the 2 normally available. Slaj hit me up for one.

I have 2 new sets of bushes though if you are into doing it yourself. They don't buzz the dash in my experience.

Gavin

[dylan8]

I might hit Slaj up for a drive then if he has one in

[SLAJ]

I might hit Slaj up for a drive then if he has one in

I'll fit it asap, I'll let you have a drive before and after if you want so you can see the difference because the car already feels pretty stiff

[shami]

pm sent.

[h100vw]

I am going to close this thread for the time being fellas. Shami has first dibs on a set of Powerflex bushes. I am expecting another mount and bushes in a couple of weeks. I'll post them up when they come in.

Thanks for your interest.

Gavin

[SLAJ]

Finally installed mine, feels amazing. Made a huge difference

[blackers10]

It was the first thing I did to mine, made a heap of difference :) (I have the purple one)
was a smidge vibratey for the first couple hundred kays but smoothed out nicely now its been installed for a month or so.

[fishburgr]

I installed a set of these a few months back and didn't really notice any difference, let alone the big difference you guys are describing.

I didn't have a torque wrench at the time so I went pretty light on the bolts, is it possible I maybe haven't done it up tight enough?? There didn't really look like there was anything I could have done wrong.

[h100vw]

I installed a set of these a few months back and didn't really notice any difference, let alone the big difference you guys are describing.

I didn't have a torque wrench at the time so I went pretty light on the bolts, is it possible I maybe haven't done it up tight enough?? There didn't really look like there was anything I could have done wrong.

Torque wrench wouldn't make that much difference, the bolts haven't fallen out.

It's possible that yours wasn't that bad but depending on how you drive, mainly change gear, you could feel more or less driveline shunt.

All the ones I have replaced have been under no tension as the bolt was removed, making me thing there'd be plenty of slack in there.

Gavin

[fishburgr]

Cool thanks Gav, like you said maybe it just wasn't that bad to begin with.

[h100vw]

Bumping, New stock in.