View Full Version : Noisy something on boost
noone
20-04-2013, 11:43 AM
I've become aware of a noise that I think is a recent development.After a recent drive in the cold, the car was making good power and this was the first time I'd really pushed the car in a while. Fresh oil and filter are the only recent changes.
When the car is warm, under full boost I'm hearing a noise that to me sounds like a hard rattle, or noisy lifters or injectors... Sounds like its from the drivers side of the engine. When driving at 80 or 90% throttle, the noise is not there.
As noises are hard to describe I'm interested in what others can hear with the drivers window down when they are WOT and boosting hard. Could it be the way the air is moving through the IC? Could be a small boot leak, but more mechanical sounding than air sounding...
Is sounds like a quick succession of small events that makes it sound as if something is moving or not quite right.
No codes, no visible issues under the hood, no loss of power. It's not a pinging or scary noise, just trying to understand which component it may be or if I should be looking at anything in particular.
Expecting to have to describe the noise better, sounds like a good excuse for some boosty driving.
Redliner
20-04-2013, 11:46 AM
Engine mount?
pomme
20-04-2013, 12:00 PM
Metallic rattling, like a loose screw? I know there were big issues with the turbo bolts. Mine came out, and you you could hear it at full boost. You can put you hand behind the engine and feel for the 3 bolts (make sure the engine is cold)... I'll see if i can find the thread it will have more information.
pomme
20-04-2013, 12:03 PM
http://www.vwwatercooled.com.au/forums/f127/loose-turbo-bolts-growing-problem-10584.html
Haven't read this but found while searching:
http://www.vwwatercooled.com.au/forums/f127/loose-turbo-bolts-solution-75685.html
Mine were fixed by a dealer under warranty year ago and haven't had an issue since.
noone
20-04-2013, 12:39 PM
I dont think its a loose turbo boltNo, not a loose bolt, I've had that one, replaced bolts. Sound is more localised to driver side of engine bay. If I had to pinpoint, I'd say its from the intake mani area.
Engine mounts is an interesting idea, do they make noise? I've had more vibration at idle recently.
And just after the group buy...
Thanks for the ideas, more welcome... Just had a look at my dipstick which is not well secured without the SAI pump to hold to. Will tie that off, see if it goes away.
rgvlee
21-04-2013, 01:39 AM
When the engine mounts go the car vibrates under acceleration, feels like a wheel is out of balance.
noone
21-04-2013, 12:06 PM
Not that bad, but seems to be on the way...
Still under 50k kms.
noone
21-04-2013, 05:36 PM
Checked all my post IC and connection clamps. Many had stretched and were loose. Car feels a little perkier, glad I did. 2 were done up totally blind behind the driver-side headlight. PITA.
Noise is still there, after more driving it sounds less localized than I'd originally thought.
Starting to think could be the turbo bolts. last time (around 10k kms ago) 1 was missing, the other 2 loose. Wouldn't really be surprising that was the issue.
Did a viable solution get found? I know there was some engineering for the solution, feeling lazy to look for it.
shhplit
22-04-2013, 11:52 AM
is it sort of misfiring under full boost?
this happened to me couple months ago...and it got worse and worse, so bad that I lost a cylinder...turns out it was a coil pack?
VWindahouse
22-04-2013, 12:05 PM
Did a viable solution get found? I know there was some engineering for the solution, feeling lazy to look for it.
:eek:
K03/K04 Turbo Locking Flange - 034Motorsport | Performance Parts for Audi, Porsche, and Volkswagen (http://www.034motorsport.com/engine-components-18t-k03k04-turbo-locking-flange-p-1300.html)
noone
22-04-2013, 12:19 PM
Thanks.
Anyone using one?
I need to log, does not sound like a misfire or ping. Not missing any power. I'm running the post-recall coils, not had any issues, but might be something in there. I'll check the spark plugs too.
noone
24-04-2013, 01:08 PM
Found the exhaust manifold bolts, one was mostly out, one is a little out, have not looked for the last one.
Tightened the 2 I could see, noise was gone.
Need to get new ones. Thanks for the ideas / advice gents.
Staffy12
16-05-2013, 08:32 PM
Ok I had a drivers side rattle that sounded ad though it was coming through the engine bay. All it was... was a loose headlight torx bolt on the drivers side. Tightened and problem gone. Give this a go. I checked the bolt again the other day and tightened it again. Im looking at experimenting with a rubber washer combined with a locking washer.
noone
16-05-2013, 08:34 PM
Thanks, was loose turbo bolts, as above...
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.