PDA

View Full Version : K04 Turbo fit a Polo 9N



Just_quietly
29-12-2012, 11:28 AM
As the topic states boys. Any help would be appreciated. :)

Just_quietly
29-12-2012, 12:12 PM
I think I've answered my own question. Thanks Emma


http://www.vwwatercooled.com.au/forums/f127/ko3s-vs-k04-why-upgrade-31782.html

Pod
29-12-2012, 12:28 PM
No worries :) It's very tempting but think it will require too much work and money to put it on my polo right now. Good luck with the sale :)

Just_quietly
29-12-2012, 12:30 PM
No worries :) It's very tempting but think it will require too much work and money to put it on my polo right now. Good luck with the sale :)

No probs. thanks for the interest. I learnt a little bit about the polo in the meantime. :)

nightphotographer
29-12-2012, 12:47 PM
What k04 have you got? I remember you had it for sale but you never mentioned the actually BW part number, you just said it's a K04. Is it a K04 001 etc etc?

tigger73
29-12-2012, 12:55 PM
Are you guys trying to spin your wheels in 4th gear or something???? :)

Just_quietly
29-12-2012, 01:05 PM
http://www.vwwatercooled.com.au/forums/images/imported/2012/12/ryvanupa-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2012/12/na9emu4y-1.jpg

nightphotographer
29-12-2012, 01:10 PM
Ahhhh so tempting...how much were you chasing again?

Just_quietly
29-12-2012, 01:13 PM
Originally 1200 but I will take 1000 not inc shipping. :)

h100vw
29-12-2012, 01:21 PM
Originally 1200 but I will take 1000 not inc shipping. :)


Never seen anyone fit a TFSI turbo on a 1.8T yet. Not sure it will go myself. The downpipe comes off the side and not down.

I don't want to prevent a sale but a Frankenturbo or proper K04 would be a better buy and a sure fit.

Gavin

nightphotographer
29-12-2012, 01:23 PM
I'll keep you posted, I wouldn't mind K04ing my cabriolet eventually. It's a long term thing, but I reckon I might be able to get one in the UK for a little cheaper - just had a quick look and there's a guy selling the K04-032 with S3 injectors, manifold, downpipe etc for $600 and I can get stuff over for the same price as shipping internally in Aus. You'll find someone though, not many people have the same ties with the UK as I do.

Just_quietly
29-12-2012, 01:34 PM
Apparently it won't fit guys. Thanks for the interest. However it will fit a MK5 and MK6 golf. Cheers

Just_quietly
29-12-2012, 01:45 PM
Does anyone actually know why it won't fit? there's a lot of assumptions here. Cheers

Sharkie
29-12-2012, 01:56 PM
That K04 will only fit the following golfs: MK5 GTI, Mk5 GTI Pirelli, MK6 ED35 and a MK6 R. It does not fit on the EA888 engine as it is off a EA113. IT WILL NOT FIT A MK6 GTI GOLF. It will most certainly not fit the 1.8T engines.

Other VWs it will fit include the Scrirocco R and Jetta and Passat 2.0Ts with the EA113 engine.

The reason it wont fit others is because the heads on these engines (EA113 and EA888 and 1.8T) are different and the spacings on the exhaust ports on the heads are very slightly different. Trying to fit this without modification of the manifold will mean all the holes don't line up properly.

Just_quietly
29-12-2012, 07:24 PM
Thank you for the clarification but where did you get your info regarding it will not fit the MK6 GTI?

Just_quietly
29-12-2012, 10:31 PM
The turbo muffler on the compressor side is the issue. Therefore it will not fit the mk6 GTI.
Thanks everyone.