PDA

View Full Version : NSW MK4 FWD Whiteline swaybar


PranK
08-06-2012, 09:54 AM
Hi all,

I have a swaybar, never used, just a bit dirty because we tried to fit it to my 4motion bora before we realised we had the wrong one.

Has no bushes. Whiteline or some other mob can hook you up.
EDIT - Found the bushes, not sure why I thought they were lost, they are on the bar.

CHEAP at $120 pickup or $150 couriered nationwide. (i think i paid $240 for it.)
geoff_gti
09-06-2012, 12:00 AM
got a part number?
harryboy_1
09-06-2012, 06:05 PM
is this a front or rear sway bar?
PranK
09-06-2012, 06:15 PM
Its a front sway bar, part number BAF13.

Whiteline BAF13 Front Sway bar - 22mm heavy duty (http://www.whiteline.com.au/product_detail4.php?part_number=BAF13&sans_vehicle=1)
PranK
17-06-2012, 07:57 PM
This would be great with some FK Coilovers (http://www.vwwatercooled.org.au/forums/f24/fk-streetline-coilovers-mk4-70529.html)!
audi-tone
01-07-2012, 03:56 PM
Does this bar go under the driveshaft and above the control arm? I'm gain rubbing issues so this maybe my solution. That's if it's still available of course.
VR6man
01-07-2012, 06:41 PM
Use the adjustable sway bar links from whiteline with the front bar, I dont have any issues.
PranK
02-07-2012, 05:11 PM
Does this bar go under the driveshaft and above the control arm? I'm gain rubbing issues so this maybe my solution. That's if it's still available of course.

It follows the same install path as the OEM sway bar. The difference is the ends are risen so it can stop in the rubbing.

But, as VR6Man said, you can also just get adjustable ends.
audi-tone
02-07-2012, 07:29 PM
I have adjustable end links. They didn't work.. Ah well. It only rubs a little. Thanks for the info
kendog
24-07-2012, 08:48 PM
Still available? I might be interested.
PranK
24-07-2012, 08:52 PM
Still available? I might be interested.

Yessir.
kendog
24-07-2012, 11:35 PM
Hi,
how hard would it be to send them to Camden GTI in Campbelltown? My car is being worked on there. What would it cost? Not sure I need it, but while the car is apart anyway, maybe.
PranK
25-07-2012, 08:47 AM
Hi,
how hard would it be to send them to Camden GTI in Campbelltown? My car is being worked on there. What would it cost? Not sure I need it, but while the car is apart anyway, maybe.

It wouldn't be hard, its still in its plastic. As stated above, $150 incl shipping.

Let me know.
PranK
25-07-2012, 09:24 AM
I also have a new, unopened adjustable rear here also if you're keen.