cylinderhead
25-05-2012, 01:21 AM
Helping out a very good buddy of mine sell his full frame Garrett GT2871R turbo kit for VAG 1.8T in this forum as he doesn't come here that often. IIRC this is posted on ozaudi if not audizine.
Here's what he has to say:-
Guys,
My motor is built and run in.. I am going to skip the ***** part and go straight to the big boys club..
Up for sale is my FULL FRAME GT2871R kit.
It has done under 6,000km and has NO SHAFT PLAY.
It is internally wastegated, has a .86 hotside and comes with:
ATP T25 manifold with external wastegate provision (block off plate included) - NO CRACKS, coated with VHT black header paint
Coolant feed -6an hard line(for both 058 and 06A)
Coolant drain -6an hard line
Oil drain -10an hard line
All you will need is an oil feed (-4an , 44'' long).
I will also throw in the T25 5bolt to V-band attachment with the V-band clamp for no extra cost.
It is set up for ALL 1.8T 20v motors (longitudinally mounted 1.8T's will require a longer oil drain.. about 1-2'' to be precise, you can have the old one if you can make it work some how) .. GTI's , A3's, A4's..
I am looking for somewhere in the range of $1350.. Compare this to the eliminator kit for sale and you have $700 left over and all you need to do is have a shop alter your down pipe to v-band (should not cost more than $150-$200 MAX).
Contact Jesse : 0413462707
Pictures will be uploaded very soon or you can contact him directly and ask for pics to be sent to your email.
IMO, this is a fantastic deal considering they're low mileage and would make a mk4 GTI or A3 1.8T / S3 or A4s go a LOT faster with this setup along with supporting mods.
Be quick as you don't see this that often at this price!
Cheers
Danny
Here's what he has to say:-
Guys,
My motor is built and run in.. I am going to skip the ***** part and go straight to the big boys club..
Up for sale is my FULL FRAME GT2871R kit.
It has done under 6,000km and has NO SHAFT PLAY.
It is internally wastegated, has a .86 hotside and comes with:
ATP T25 manifold with external wastegate provision (block off plate included) - NO CRACKS, coated with VHT black header paint
Coolant feed -6an hard line(for both 058 and 06A)
Coolant drain -6an hard line
Oil drain -10an hard line
All you will need is an oil feed (-4an , 44'' long).
I will also throw in the T25 5bolt to V-band attachment with the V-band clamp for no extra cost.
It is set up for ALL 1.8T 20v motors (longitudinally mounted 1.8T's will require a longer oil drain.. about 1-2'' to be precise, you can have the old one if you can make it work some how) .. GTI's , A3's, A4's..
I am looking for somewhere in the range of $1350.. Compare this to the eliminator kit for sale and you have $700 left over and all you need to do is have a shop alter your down pipe to v-band (should not cost more than $150-$200 MAX).
Contact Jesse : 0413462707
Pictures will be uploaded very soon or you can contact him directly and ask for pics to be sent to your email.
IMO, this is a fantastic deal considering they're low mileage and would make a mk4 GTI or A3 1.8T / S3 or A4s go a LOT faster with this setup along with supporting mods.
Be quick as you don't see this that often at this price!
Cheers
Danny