PDA

View Full Version : help for changing Dome light



Sheen
28-03-2012, 01:38 PM
anyone know how to change Interior light?(Dome light)
if so can you please post up a DIY! or any link that show how to change Dome light?
Thanks alot!!

Syd118TSI
28-03-2012, 02:47 PM
When you say dome light do you mean the central light that comes on when you open the doors, that also contains the individual map lights? If so you should be able to pop the whole plastic part out quite easily, it's in two sections. The front section (under the 'grill') hosts the alarm sensors so you can leave that there, the remainder clicks into a cable so when you pop it out you can disconnect that cable to work on it.

Are you just wanting to change one of the bulbs? They screw out from the top side from memory....

Sheen
28-03-2012, 03:15 PM
i wanna change all of them! is that alright if u pop a picture up and circle it where i should pull out from ? sorry for bothering :(

nikanasz
30-03-2012, 02:38 PM
http://www.vwwatercooled.org.au/forums/f127/interior-map-light-switch-broken-any-help-66954.html

refer post #4, i tried explaining how to yank the light assembly out. also, the bulbs can be removed by turning the 'button' (that holds the bulb) 90⁰ and then just pull out. you can see it at the top right in the picture there.