Gorgeous Superlegerras 17" 5 x 100

[dainese]

Missus didn't want them, so i thought I would let you guys know.

Good price I reckon:

Subaru Alloy Wheels 17" Set of 4 - Good Condition | eBay (http://www.ebay.com.au/itm/Subaru-Alloy-Wheels-17-Set-4-Good-Condition-/260854974041?pt=AU_Car_Parts_Accessories&hash=item3cbc2b0659#ht_2127wt_1141)

[Jarred]

pity about the offsets, price however is pretty good.

[The_Hawk]

I looked into Subaru wheels for the VR6 a while back, the centre bore was out by 1mm (maybe less) from memory, being after market they are probably not 100% factory spec, but definitely something you should be aware of.

[dainese]

pity about the offsets, price however is pretty good.
easy! spacers!


I looked into Subaru wheels for the VR6 a while back, the centre bore was out by 1mm (maybe less) from memory, being after market they are probably not 100% factory spec, but definitely something you should be aware of.

Again EASY! machine the centre bore!

Our wheels are hard to come by I reckon. The hardest part is the PCD, the rest, to me is smooth sailing. hehe

[goodfella]

I dont beleive OZ, MOMO etc make the rims with direct hubcentric fitment, you need to get the appropriate Hubcentric rings which are only about $20 for the set.

I would be more concerned about the ET48 fitting Mk4s, but as Dainese said, Spacer up baby!

[Rob Burns]

Did spacers become legal w/o an engineers certificate?

[dainese]

are you concerned about spacer legality?

in our nanny state country, they wont be 'legal'.