PDA

View Full Version : 1.8 16v KR engine conversion



Volksee77
17-02-2006, 06:44 PM
anyone know where i can find a wiring diagram for KR series engine????? the haltech system was easy but motech is giving me some greif with the a/f ratio's and timing

roccodingo
17-02-2006, 07:38 PM
can possibly have what your looking for, are you still using the knock sensor Ign stuff ??

Volksee77
17-02-2006, 08:34 PM
yeah mate i retained all the original sensors for the motor as the haltech was 100% compatible but when we removed the haltech a few odds and ends went missing or fitted to customers cars and i have since lost all there relevant part no's and the wiring diagram in the back of beyond and i was chasing the schematics so i can start again

Golf Loon
17-02-2006, 08:37 PM
11 Mk1s and 2s, thats worse than me. I have a few KR engines and looms though, so if you wanna know any specific part numbers, i can help. Or any parts :wink:

Volksee77
17-02-2006, 08:42 PM
yeah mate any chance u want to sell me a VAG wiring diagram or all the required sesnors ie a/f knock ign o2 etc???? the whole deal as i don't have the time to harass coventries to find and then wait for them to replace the ones they will surely supply that are the wrong part no's as per usual
:evil:

Golf Loon
18-02-2006, 07:58 AM
I`m pulling one motor apart for spares. You can have the sensors. Any idea which ones are missing apart from knock sensor?

Ryan
18-02-2006, 02:34 PM
You should find a wiring diagram here:

:arrow: http://volkswagen.msk.ru/index.php?p=page01

All the files ending with [eng] r in english and 90% r in eng. I can translate only German ones if you like? The rest is all russian to me :idea:
Good luck mate!