Video in Motion

[IN2VWS]

Not sure if it has been discussed here before....but here it is again if it has

I just activated the video in motion on my RNS510. It is an easy mod, and works a treat (not for me...its for the passengers).
Here is the link:
Video In Motion for US RNS-510 - TDIClub Forums (http://forums.tdiclub.com/showthread.php?t=326199&page=1)

The buttons they tell you to hold down were different to mine. I held down the eject, star and setup buttons.

[guthrie]

I can confirm also that this works. I burnt the "berto" file to a CD, inserted it into the RNS ... A few minutes later I have video in motion.

Glad I didn't spend $100+ for an electronic module to do this.

[GraveDilute]

Unfortunately it didn't work for me.
Maybe I have a different firmware or it's not compatible with the LED version of the RNS?

[GraveDilute]

This file works for me

https://rapidshare.com/files/3679142426/mycd.rar

[Idle]

This file works for me

https://rapidshare.com/files/3679142426/mycd.rar

Rapidshare reports that the file has been removed.

[GraveDilute]

OK, I've uploaded the same file.
This worked for me

Download mycd iso, fast and secure downloading from easy-share.com (http://www.easy-share.com/1917621073/mycd.iso)

[hoddy]

I have also had success with the Berto VIM file. (the myCDiso did not work).
2010 Transporter
Burnt disc at 24x using Imgburn (nero didn't work properly)

Please note: when I inserted the disk it came up with CD error but it did not eject. Don't push the OK button and it will then restart and detect the CD and start the process.

[ithinkimightbe]

Just used the Berto ISO image in my 2010 GTI and it worked flawlessly.

Took ten minutes in total including burning the ISO. Only problem encountered was a 'clamp issue' when inserting the CD which involved changing the time format to 24-hour time. The CD wouldn't work with the keys in the ignition, but installed perfectly without.

Thanks for the tip!

[Ryan_R]

Will give this a go and report back, thanks.


[+] Updated software, all works fine. :)

[l3lazin]

LEGEND!!

Works on mine as well. Had the clamp issue and fixed it by changing the time setting and not having the keys in the ignition as 'ithinkimightbe' advised.

[aussietig]

LEGEND!!

Works on mine as well. Had the clamp issue and fixed it by changing the time setting and not having the keys in the ignition as 'ithinkimightbe' advised.

Clamp issue is actually ID10T fault code the unit throws up!

Only appears if keys are in!

With all RNS510 FW or SW installs, make sure there's no keys inserted!

Just turn the unit on manually!

[mycl]

Fan-friggin-tastic! That mycd.iso works a gem in my GTI mk6 from Mar 10...! No key in ignition, do a reboot with < and > and * held, and wait for it to do its thing then presto!

[R36 DSG]

How did I not see this sooner, worked first go in an 08 R36. Followed same procedure as mycl above.

Thank you!

[l3lazin]

Clamp issue is actually ID10T fault code

lol True, the procedure is duly noted for the future...

[team_v]

OK, I've uploaded the same file.
This worked for me

Download mycd iso, fast and secure downloading from easy-share.com (http://www.easy-share.com/1917621073/mycd.iso)

Apparently this one is not available any more, says it has been removed?
Can you please re-host it?

[R36 DSG]

Try this

File:RECODE VIM Berto89.zip - Rob86Wiki (http://www.robpol86.com/index.php/File:RECODE_VIM_Berto89.zip)

[Titanium]

Worked for mine too. Mid 2010 GTi. Just used windows disc burner thing that is part of Windows 7.....worked as in the video.
I held down the reset buttons <>* and inserted disc. Went from there, no key in as per other peoples posts.
Thanks guys....strictly for the passengers of course.
BTW it was a mid 2010 factory installed RNS-510 (sat-nav unit). Saw this thread a while ago but got confused after reading about the day/night button etc....but works fine in aussie versions using the reset buttons.

[brimway]

Try this

File:RECODE VIM Berto89.zip - Rob86Wiki (http://www.robpol86.com/index.php/File:RECODE_VIM_Berto89.zip)

Worked for me too

RNS-510 Video In Motion via firmware change 5 min job and free. - VW GTI MKVI Forum / VW Golf R Forum / VW Golf MKVI Forum / VW GTI Forum - Golfmk6.com (http://www.golfmk6.com/forums/showthread.php?t=22712)

[Klink1313]

I am happy to report that this "Berto" file worked on my MY11 RNS 510. Pressed the eject, star and setup buttons together, then inserted the disc and followed the prompts. Went for a drive and voila it worked. My passengers can now view DVD's on the move. Only down side was I noticed dust on my screen so had to dust that off LOL

[dArK5HaD0w]

i don't have the "*" star button that a number of people r mentioning here to reboot the unit. i've got < and >, but no *.
which one would it be?!?!?
my rns510 looks like this....
http://www.vag-tec.com/public/images/pictures/skoda-columbus-large.jpg

any ideas?!?!

[Ryan_R]

The mic button. It's always which-ever one is next to the eject button.

[dArK5HaD0w]

well....i've burnt the cd, and went through the steps.
its seems to have done its "magic" successfully.
now to wait for the drive to work tomorrow morning to see if it actually works.

[SMCC]

software updated loaded correctly, even got the "success" message but if i put in DVD and drive off - screen goes blank with normal message about screen not being displayed. Any suggestions?

[GraveDilute]

software updated loaded correctly, even got the "success" message but if i put in DVD and drive off - screen goes blank with normal message about screen not being displayed. Any suggestions?

I had the same deal with the "berto" file but the "mycd" file worked perfectly.
Not sure if it's older units/firmware that is having an impact?

Try both images and see if they work

[SMCC]

"mycd" file doesn not exist anymore - is there an active link for this file so i can try that one?

[GraveDilute]

Try this
mycd.iso (http://www.mediafire.com/file/1o6qqfrbsju26s2/mycd.iso)

[SMCC]

"mycd.iso" file worked a treat - thanks for the share. If you need any VCDS cable work done just pop me a message

[crops]

Got this working on my MY12 Ed35 GTI this evening. Took me a few goes to burn the file onto the CD correctly from my MacBook. Once I got that sorted it was a breeze.

[DreamensioN]

I've re-hosted the files on my own site incase the other links die again.

MyCD.iso
http://www.dreamension.net/forum/vwwatercooled/mycd.iso

Berto
http://www.dreamension.net/forum/vwwatercooled/RECODE_VIM_Berto89.zip

[DreamensioN]

Ok so I finally did this, and the Berto one worked well in the Tiguan (MY 11.5).

The "MyCD" version gave me a "Software downgrade error (010304)". Basically the error message was the software I was installing was the same version as what's already installed. I rebooted the RNS-510, then tried the Berto version.

That worked perfectly.

[kamold]

Or you could upgrade to 39xx firmware that has VIM enabled, secret menu enabled, ability to use custom POIs and also custom partition sizes so you don't waste so much space...

http://www.vwwatercooled.org.au/forums/f78/custom-pois-3xxx-firmware-aus-nz-maps-v-4-1-poinspect0r-65337.html

[ozr]

I have the Scirocco R 2/2012 and I have tried both patches with no success
I get the DVD/CD error message and I dont press OK and it just stays there...it wont restart itself.
I have no keys in ignition and push the on button so it fires up
I am pushing <> and * which then gets me the black screen which I take for the reboot
I then stick the disc in
It says loading dvd/cd and then I get the error message and it asks me to pusk OK I dont as directed in this thread and it definetely wont restart.
Pull disc out and try DVD.....NARDA
Farknell
Any suggestions
Maybe the new RNS510 is onto the patch and wont allow the shortcut

H-E-L-P

Peter

[kamold]

Sounds like it can't read your disc. Try burning at slowest possible speed and try a different brand of cd or a different burner.

[ozr]

ok will do

[FJ Steve]

Try using a cdr instead of a dvdr

[ozr]

Tried that too.
I have a pile of 5 dead disks in front of me
Try using a cdr instead of a dvdr

[Titanium]

Upgraded from sw2680 to 3810 on a version c rns 510. Just to confirm my VIM still works.

[Ryan_R]

3810 adds VIM whether you had it before or not. (The version posted here by kamold or whoever it was)

[Titanium]

3810 adds VIM whether you had it before or not. (The version posted here by kamold or whoever it was)

Hmmm wasn't posted here, got it from another place. Unless they just used kamold's. Interestingly my test menu/secret menu had disappeared despite the VIM still working. Had to use VCDS to get this back again (navigation 37, adaptation 10, then change channel 50 value from 0 to 1 as per maverick's site. Anyway thanks to all and sundry for the various advice sources.

[Ryan_R]

No probs - I was referring to this one, since it also partitions the HDD better so that there's less wasted space (more for music):
http://www.vwwatercooled.org.au/forums/f78/custom-pois-3xxx-firmware-aus-nz-maps-v-4-1-poinspect0r-65337.html

[MJW]

Hi All, I have tried both the berto & mycd file & can't get it to work. Has anyone had success on a MY12 RNS510 (particularly a Passat)? The berto file doesn't do anything & the system just re-boots & tries to read the file but then get nothing. RNS510 tries to load the cd but then comes up with an error that says error & it is unable to read & asks me to press OK. No matter how long I leave that mssage on it won't disappear.

The mycd file seems to got through the process & loads etc but then a message pops up at the ens saying update error & ejects the cd & says that once I remove the cd the original "SW" will re-install.

Can anyone offer any suggestions?
Thanks

[kamold]

Just upgrade firmware:
http://www.vwwatercooled.org.au/forums/f78/firmware-updates-rns510-units-australia-nz-69790.html

It includes VIM.

[hoddy]

Anyone had any problems with DVD region code following VIM upgrade?
I'm unable to play region 4 discs since doing the VIM upgrade...:eek:
Regarding the changes that I've had to my RNS510 - have had a map upgrade and the VIM...
Am due for service next week, will get the dealer to change it back to region 4.

[kamold]

Region coding can only set via VCDS or dealer tools. Firmware upgrade shouldn't change it.
But stranger things have happened....

[Nevermind]

I have a 2013 Tiguan with RNS510.

According to the unit I'm running HW-Version H71 and SW-Version 4120.
Is it ok to install VIM on this?

All the talk in this thread seems to be on units with older firmware.

Thanks

[Guest001]

I have a 2013 Tiguan with RNS510.

According to the unit I'm running HW-Version H71 and SW-Version 4120.
Is it ok to install VIM on this?

All the talk in this thread seems to be on units with older firmware.

Thanks

YES.......