PDA

View Full Version : SMIC - Any news ?



DIDZ
20-05-2007, 12:41 PM
BoostFactory:
http://boostfactory.net/product_info.php?cPath=22&products_id=77

Forge Motorsport:
http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=1703&product=FMINTMK4S

Gains over stock SMIC
Size increase: 27mm x 5mm x 15mm - HAHAHA! (2.7cm x 0.5cm x 1.5cm)
Pressure loss reduction: 2psi
Air temp reduction: 6-9 DegC

TyrolSport:
http://www.tyrolsport.com/vwperformance.htm


Any others ? Pros and cons with experience wanted if possible.

And I DON'T want a front mount...........

h100vw
20-05-2007, 12:56 PM
BF USD$550 AUD 616
Forge UKP420 AUD 1000
Tyrol USD 750 AUD 909

All plus shipping

I had a front mount made for my A3 for 1600 all in fitted.

If you are adamant not to be doing the FM then I'd be going for the BF one. I bet you could get one made locally to go in the same space as the std one. Thing is there are other restrictions that need looking at too, like pancake pipe and TIP. If you start adding in the cost of a pancake replacement which I no longer need then the FMIC fitted looks better all the time.

gavin