Need some help with pricing to replace a part

[Simz]

the back of my car was hit today, i need some help on where abouts should i get it fixed, or the general pricing for it

Imageshack - imag0015j.jpg (http://img707.imageshack.us/i/imag0015j.jpg/)
Imageshack - imag0016u.jpg (http://img826.imageshack.us/i/imag0016u.jpg/)
these are the extend of the damage, so if anyone can help tell me what parts i need to get it fixed. thanks much

[Danny]

Wow, how'd you do it? Looks like the corner of a white painted wall or carpark pillar to me, and generally you hit them.... Jeez, no idea how much man, do you not have insurance?

[hooba]

the back of my car was hit today, i need some help on where abouts should i get it fixed, or the general pricing for it

http://img707.imageshack.us/img707/2475/imag0015j.jpg
http://img826.imageshack.us/img826/482/imag0016u.jpg
these are the extend of the damage, so if anyone can help tell me what parts i need to get it fixed. thanks much

These guys are across the road from Chatswood Classic Cars service centre - they're an approved VW repairer.

Concours Motor Body Repairs‎
66-68 Hotham Parade
Artarmon NSW 2064
(02) 9439 2626

[Simz]

reversed into a ledge sticking out, didnt see it in the mirror 8 (
sad sad day for me T_T

[Maverick]

reversed into a ledge sticking out, didnt see it in the mirror 8 (
sad sad day for me T_T

Might be an idea to get a bumper with reverse sensors fitted seeing as the bumper needs to be replaced :P

[MurphyTheElf]

Factory RVC = $500. That damage >= $1000.

[triode12]

These guys are across the road from Chatswood Classic Cars service centre - they're an approved VW repairer.

Concours Motor Body Repairs‎
66-68 Hotham Parade
Artarmon NSW 2064
(02) 9439 2626

I would not recommend them. They are not that good. I've seen their work.
I'd recommend Jack Hillermans Smash Repair in Artarmon instead - they are just down the road at 32 Whiting St Artarmon.
Speak to Stephen (Manager) and mention that you are from the VW forums. He has done quite of number of GolfmkV member cars and comes highly recommended. i.e. He doesn't need to paint adjacent panels to blend the affected panel. Costs are cut down because of that and you don't have two additional panels painted for nothing. I had warranty work done thru Jack Hillermans. VWA approved the work to be done with them -just insist on it.

[triode12]

the back of my car was hit today, i need some help on where abouts should i get it fixed, or the general pricing for it

Imageshack - imag0015j.jpg (http://img707.imageshack.us/i/imag0015j.jpg/)
Imageshack - imag0016u.jpg (http://img826.imageshack.us/i/imag0016u.jpg/)
these are the extend of the damage, so if anyone can help tell me what parts i need to get it fixed. thanks much

The bar will have to be replaced and a new one painted to match. It will definately cost more than the $500 excess which you should not have to pay if you are not at fault. I'd get your insurance company to speak to the insurance of the person who hit you.

[HPSOV]

I'd get your insurance company to speak to the insurance of the person who hit you.

I hope the stationary ledge you reversed into has insurance!

[Syd118TSI]

Factory RVC = $500. That damage >= $1000.

Plus the cost of an Rns510 or rcd510 plus the cost of the reverse sensors...

[Simz]

meh i was gonna pay for it anyways, my excess is liek 3k? under 25 and has a driving suspension within 2 years... not gonna say nothing to insurance company if it's udner 3k...
ran into it cause was pretty distracted at the time.... shouldnt talk out the window to random people when i am parking next time T_T

[ian]

Most of the indent will come out very easy, a hair dryer on hot will make the plastic bumper flexible, if you can get your hand up behind the part thats pushed in and push out, or you could take off the whole bumper and heat it and most will pop easily out .

[golfgti101]

popped out, plastic welded, blend repair. about 500bux