PDA

View Full Version : window washers help



antinora
17-04-2007, 10:03 PM
hey guys my gti has its little problems lol.

now the washers dont work.. there is heaps of water but the water doesnt spray out... any help ?

static1800
17-04-2007, 10:32 PM
could be a clogged line, can you here the motor running? or no sound at all?

antinora
17-04-2007, 11:10 PM
i cant hear the motor running ..i cant hear the wizzing noise...doesnt work for rear wiper either

Rednut
17-04-2007, 11:16 PM
mine was doing the smae thing.. had to get the motor replaced. i'd check for clogging also

brackie
18-04-2007, 05:27 AM
Get a multimeter/12v globe or other circuit tester and make sure you're getting current to the motor. If not, check wiring and fuses. If you are, chances are that the pump's seized. This often happens after summer when you haven't used it much. It isn't a drama 'cos if it's the same as the mk1 you can disassemble and free it. There's a gasket between the pump end plate and the motor and it probably would have reached its use-by date by now. I usually make up a new one from an old piece of inner tube. Make a template and sandwich the rubber between two pieces of wood. You can then drill the holes accurately through the wood and rubber.

antinora
18-04-2007, 09:05 AM
got any pics brackie

syncro
18-04-2007, 12:16 PM
The usual problem is the motor gets gummed up.
Remove it from the bottle and hoses, then pour WD40 or similar into the inlet and apply 12v until it runs.

antinora
18-04-2007, 10:12 PM
ok thanks guys