Audi Master cylinder

[GeorgeMK1]

Hey guys

I have a Audi master cylinder installed on my Golf Mark 1. I have seen the Audi service book and thats how i know it is from Audi as the first few numbers match.
Numbers: 8936 121 05 B
It also says 20mm on the side, (if that helps)

Just curious if anyone knows from what particular Audi that is, i think it could be from a 84 upwards. If anyone has a corresponding Master cylinder for sale, or perhaps a place that i can buy one from in Melb.

Cheers-George
Heres a pic..

http://www.vwwatercooled.com.au/forums/images/imported/2010/03/brakebooster002-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/03/brakebooster001-1.jpg

[Pete@ECSTuning]

Well I can't tell you what that is from, but we can get you a Mk I master cylinder still - click here for a new master cylinder (http://www.ecstuning.com/Volkswagen-Golf_I-Rabbit-8v/Braking/Hydraulic/?salesrep=CArmbruster&utm_source=vwwatercooled&utm_medium=forum&utm_content=CArmbruster&utm_campaign=postreply). It looks incredibly similar. Any reason you are running an Audi master cylinder?

[h100vw]

That part number is on the servo/booster not the master cylinder. The master cylinder has the brake pipes coming out of it. If you need a new master cylinder, the one off a late mk2 GTI will go on. Just get it out of the box before handing over the money to make sure it has 4 ports like yours. Aftermarket ones usually do and they supply blanking plugs, in case you only need 2 outlets.

Gavin

[Golf Loon]

Yup Mk2GTI or SEAT Cordoba will be the same. I can supply you a new one for $160 or a used one for $60. Get new and have no more dramas.

[GeorgeMK1]

There is no specific reason why i am running an Audi brake booster/master cylinder, i just bought the car with it like that.
My booster is fine, it holds pressure, its the M/C thats finished.

Thanks for the offer Matt, however ill have a look at my local VW as its just easier for me, but if not i'll let you know mate,
Thanks for that guys. George.