PDA

View Full Version : Removing the A-Pillar cover!


Allegiance
17-07-2010, 07:24 PM
Hi Guys,

I need to remove the A-Pillar cover to replace the tweeter but I can't work it out! I don't think it's like the Golf where there is a torx screw behind the airbag symbol.

Thanks!
broxigar1983
03-04-2011, 02:18 PM
Hi Guys,

I need to remove the A-Pillar cover to replace the tweeter but I can't work it out! I don't think it's like the Golf where there is a torx screw behind the airbag symbol.

Thanks!

Any luck on this? Will need to do this soon.
GraveDilute
03-04-2011, 09:10 PM
Pull firmly.
There is no torx screw
broxigar1983
03-04-2011, 09:42 PM
Pull firmly.
There is no torx screw

Thanks, will try that
gavs
04-04-2011, 08:38 AM
Make sure you pull the top firmly and don't rip out the wires....
Allegiance
04-04-2011, 01:24 PM
Buy a new set of a-pillar covers like I did, then you don't have to worry about ruining the old set or bending the metal clips. Also, pull the negative cable from the battery so you don't kill yourself when the airbag explodes in your face.
broxigar1983
04-04-2011, 01:29 PM
Buy a new set of a-pillar covers like I did, then you don't have to worry about ruining the old set or bending the metal clips. Also, pull the negative cable from the battery so you don't kill yourself when the airbag explodes in your face.

DO you have a picture of these? Thanks for the tip on the battery cable :)