My 2009 Audi B8 A4

[SleeperA4]

Thought I would start a thread to show some of the mods to my car.

Thanks to ECSTuning for the following nets. Keeps things much tidier in the boot.

http://www.vwwatercooled.com.au/forums/images/imported/2010/06/boot_net-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/06/net1-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/06/net_installed-1.jpg

I have had a few people ask so here are the part numbers

Cargo Net, Black Elastic Nylon With Hooks - For Larger Loads ES#346465 - 3C5065110
CARGONET ES#462208 - 8T08617104PK

[Pete@ECSTuning]

Our pleasure, thank you for the order!

[SleeperA4]

Another Mod

For those interested the part number is 545/20.

http://www.vwwatercooled.com.au/forums/images/imported/2010/06/bmc-1.jpg

[Pete@ECSTuning]

High flow intake?

[SleeperA4]

High flow intake?

Always interested in looking at other mods. When I ordered the panel filter it took six weeks to get and was the first in the country. Our options here are limited and Audi Australia is every expensive and thus my need to obtain parts from overseas suppliers include your company.

[SleeperA4]

http://www.vwwatercooled.com.au/forums/images/imported/2010/06/rearlip-1.jpg

[Pete@ECSTuning]

I like it very much! Keep the thread updated!

[SleeperA4]

Install by Universal Shield - Universal Shield - Advanced Surface Technologies (http://www.universalshield.com.au)

The kit is computer cut to suit the car. I got the full kit and would recommend it. Unless you look very closely you cannot even notice that it is there.

http://www.vwwatercooled.com.au/forums/images/imported/2010/07/carbra1-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2010/07/carbra2-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2010/07/carbra3-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2010/07/carbra4-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2010/07/carbraaudi-1.jpg

[SleeperA4]

After a momentary lapse in concentration for the first time in over a decade I scraped one of my wheels. After doing some research and going to various repairers I ended up going to All Mag Wheel Repairs in Ingleburn.

They also repaired a wheel for a friend of mine who has a Touareg after one of his wheel was guttered quiet badly it was a polished style wheel and you could not tell.

I am very happy with the job, my scrap was long but not deep and I had them respray the whole wheel, others were going to just spray the affected section.

I did not have a before picture but the missing part of the bead on the picture below will give you some indication of the damage.

http://www.vwwatercooled.com.au/forums/images/imported/2010/07/tyre_damage-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2010/07/finished_wheel-1.jpg

[Pete@ECSTuning]

Looks good, you can hardly tell. (By hardly I mean I can't!)

[DubSteve]

When you can't tell at all that there was a actual scratch and deep cut there thats pretty good!

[SleeperA4]

What I use to keep my car looking so good!

http://www.vwwatercooled.com.au/forums/images/imported/2010/08/p21kit-1.jpg