Polo 6N2 20 V Turbo Project

[adonventer]

Hey there

This is a car me and my son will be building up. We have already bought a 20 Valve engine and just waiting for delivery. We will be removing the current 1400 16 Valve motor, Gearbox with shift linkage and we will be selling the rims and tyres which we will advertise in the for sale column.

So we will be putting up pics and asking for advise as we go along.

Andy and Ondrej

P.S. how do we put pics up?

[Jarred]

Sounds like an interesting project! can't wait to see how it unfolds.

for pics, get an account on photobucket.com (free) and you can upload your pics with them, and then post them directly into your thread

[GoLfMan]

I'll be keeping an eye on this!

the 6n chassis was crying out for a decent engine, sounds like your going to put one in! :D

[adonventer]

http://i823.photobucket.com/albums/zz152/adonventer/oddsandends011.jpg
http://i823.photobucket.com/albums/zz152/adonventer/oddsandends009.jpg
http://i823.photobucket.com/albums/zz152/adonventer/oddsandends005.jpg
http://i823.photobucket.com/albums/zz152/adonventer/oddsandends003.jpg

[seangti]

So what's the idea behind the build? Building it just for fun, daily driver, track days or anything?

[Stephy]

Oh. My. God.
I love it.
So. Jealous.

[adonventer]

thanks i am just as jealous because my son is going to enjoy it and i have to build it. it is going to be his drive around car with the occasional street drag meet.
after his project we will hopefully start with mine

[sports racer]

This is going to be a very interesting thread. I had my 97 Polo with Matt for a week trying to fit a 1.8 motor and gearbox from a Seat but it just wouldn't fit. Subframe would have to be severley modified and the motor was too tall.

But like Golfman says, the old Polo's are crying out for a decent engine. If you can carry it off it should make for a really good car. Size is similar to the MK1 Golf and it doesn't take much to get it handling really well. With a decent engine and suspension mods it's sort of like a modern MK1.

Here's mine before I hit a kangaroo and wiped out the front passenger corner. My MK2 is nowhere as refined to drive but it does go quicker. If I could fit the MK2 mechanicals into the Polo I would be a happy man.

http://www.vwwatercooled.com.au/forums/images/imported/2010/03/DSCF0399-1.jpg

[Whubbsie]

nice to see some real polo action going on this will be awesome

[adonventer]

i have never spend so much thought on how to tackle this project and reckons everything will fall in place as we go along. my hardest project was building a rwd mk1 golf by installing a golf mk2 front suspension in the rear. so hopefully this will be an easier mission thanks to everybody for showing interest. we will try to show people the ups and downs as we go along where somebody may have better ideas or insight to help us along aswell.

[Stephy]

Can't wait for it! It will be great!
Got any pictures of the RWD MK1... Ive never seen one of those before...

[adonventer]

No sorry stephy we lost all the pictures when we moved here from South Africa. A friend of our still has one we will try get pictures and there is a MK1 Golf with a turbo engine in the front and rear of the car we will try get pictures of that aswell

[Jarred]

I was wondering where you were from! Not many people would take on a conversion like that here!

[WABIT]

you might have a problem with the drivers side engine mount being on the upper side of the chassis leg compared to the 1.8t being underneath, but nothing too hard i can imagine, just heling you out ;)

dom

[adonventer]

We have already have a solution for that little problem :D

[GoLfMan]

keen to see some progress on this :D

[philthy]

Sounds like a cool project. Will be following to see how you go. :thumbup:

[adonventer]

this will take some time but we will post pictures as we go along.there will always be somebody that will have a better idea and we will need all the advice that people will throw at us and even may help somebody planning to do the same thing

[GoLfMan]

this will take some time but we will post pictures as we go along.there will always be somebody that will have a better idea and we will need all the advice that people will throw at us and even may help somebody planning to do the same thing

its definately a project I'd consider. I miss my 6n!

[adonventer]

yeah i am also sorry it is now my sons and not mine anymore, i had to trade my gsx1000r in for the polo and now my boy is going to enjoy it. but i will find some excuse to test it.

[Water Boy]

Good work mate!

Cant wait to see pics as 1.8t goes in...

[mk3pete]

nice project!!!!
heres some inspiration i just stumbled across this just then lol..... some nice polo action
YouTube - Polo 6N VR6 Turbo (http://www.youtube.com/watch?v=pVympgkxaeU&playnext_from=TL&videos=OgTflWSHsHw&feature=grec_index)

[adonventer]

the motor arrive tomorrow, and our first job will be to get all the right motor parts as we want to build a 2.1 sub, head port and what ever. still trying to find a decent pair of camshafts. i prefer high lift and lumpy stuff. we will get all the magic goodies and then fit the motor.

[Water Boy]

Do you need crazy camshafts for a 1.8t?

Or are you rebuilding the 16v?

[PeDiES]

the motor arrive tomorrow, and our first job will be to get all the right motor parts as we want to build a 2.1 sub, head port and what ever. still trying to find a decent pair of camshafts. i prefer high lift and lumpy stuff. we will get all the magic goodies and then fit the motor.

cat cams 3658 are the lumpiest cams out for a 1.8t but require an aftermarket ecu

[Stephy]

Oh my gosh. This is going to be the best car ever. I can feel it in my bones.

[adonventer]

thanks for the cams ,yep we are building a 20v if you want to do something do it right the first time i say.got the motor tonight and will start mods on the manifold and start cutting all the flanges for the exh header.and thanks we do hope it is going to be one of the good conversions.

[Jarred]

what turbo are you going to run?

[adonventer]

i was looking at something similar to the gt 35 r not sure yet as it is my sons car and he must first get used to the car

[adonventer]

Here is the new engine we are putting in

http://i823.photobucket.com/albums/zz152/adonventer/OndrejsCar012.jpg
http://i823.photobucket.com/albums/zz152/adonventer/OndrejsCar009.jpg
http://i823.photobucket.com/albums/zz152/adonventer/OndrejsCar004.jpg
http://i823.photobucket.com/albums/zz152/adonventer/OndrejsCar003.jpg

[GoLfMan]

out of Passat/A4??

nicceee :)

[cdogg]

this looks tip top... i'd never have the baws to do something like this
good luck

[4130]

Go team!

Looks like this will be a first in Oz!

[adonventer]

thanks my brain is already half fried, but i believe we will get it right and i am sure we will get some good advice from the more clever people,

[VWindahouse]

One word lads.............EPIC!!!

[adonventer]

Here is some pics of us stripping the engine

http://i823.photobucket.com/albums/zz152/adonventer/P3292517.jpg
http://i823.photobucket.com/albums/zz152/adonventer/P3292498.jpg
http://i823.photobucket.com/albums/zz152/adonventer/P3292500.jpg
http://i823.photobucket.com/albums/zz152/adonventer/P3292491.jpg
http://i823.photobucket.com/albums/zz152/adonventer/P3292490.jpg
http://i823.photobucket.com/albums/zz152/adonventer/P3292512.jpg
http://i823.photobucket.com/albums/zz152/adonventer/P3292503.jpg

[adonventer]

Here are some pics of the new Pulley and Intake manifold under construction

http://www.vwwatercooled.com.au/forums/images/imported/2010/07/Mybirthday060-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/07/Mybirthday058-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/07/Mybirthday057-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/07/Mybirthday056-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/07/Mybirthday054-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/07/Mybirthday053-1.jpg

[GoLfMan]

cool!

did you mill the plate yourself, who is going to TIG it up for you? Wouldn't mind making my own manifold either!

[adonventer]

all machining is done by our self, the welding will be done in waroona at macalls manufacturing. its more fun making your own stuff.

[Stephy]

Holy. Cow.

[GoLfMan]

all machining is done by our self, the welding will be done in waroona at macalls manufacturing. its more fun making your own stuff.

sweet, would be a cool project.

Im a machinist myself and its always fun to find stuff to make :)

[adonventer]

Hey all progress is going a little slow. got the turbo today just bought a new crankshaft and will order injectors soon.

here is some more pics

http://i823.photobucket.com/albums/zz152/adonventer/P8036016.jpg

http://i823.photobucket.com/albums/zz152/adonventer/P8036020.jpg

[cdogg]

haha been waiting thought you had forgotten us...

[adonventer]

this is such a slow process, i am battling finding the parts we want.had to buy the crankshaft in africa the gearlever is in nederland and the rest all over the word. just bought the injectors and now i can make the fuelrail. hope to get this car running at the end of the year.

[DubSteve]

Great stuff, just stumbled across this now!

[cdogg]

this is such a slow process, i am battling finding the parts we want.had to buy the crankshaft in africa the gearlever is in nederland and the rest all over the word. just bought the injectors and now i can make the fuelrail. hope to get this car running at the end of the year.

ah dude no need to explain to me (although that is interesting info)... i wouldn't even have the guts to attempt this awesome exercise
keep up the goodness
cheers

[adonventer]

We start stripping the engine out the polo this weekend.......cant wait to get my hands dirty and make way for the new beast

[adonventer]

No not forgotten, just working through hours of web search and brain storming to get the right combo and parts for the job. Hope what we have is going to work........

[adonventer]

Front end coming off....... Me & Dad http://i823.photobucket.com/albums/zz152/adonventer/car024.jpghttp://www.vwwatercooled.com.au/forums/images/imported/2010/08/car023-1.jpghttp://www.vwwatercooled.com.au/forums/images/imported/2010/08/car016-2.jpghttp://www.vwwatercooled.com.au/forums/images/imported/2010/08/car014-2.jpghttp://www.vwwatercooled.com.au/forums/images/imported/2010/08/car002-2.jpg

[Jarred]

Nice, keep it up!

[cdogg]

how did you go gettin the old donk out...
hahaha love dads work boots in the photos above...

[adonventer]

to be honest we will do the rest this weekend, the beers got the better of us. spend all week making a collector much harder to make than what it looks. the head is getting a port job and we will start making the engine mounts next week.

[adonventer]

Here are pics of us taking out the old engine, QUITE A MISSION...

http://i823.photobucket.com/albums/zz152/adonventer/car007.jpg
http://i823.photobucket.com/albums/zz152/adonventer/car006.jpg
http://i823.photobucket.com/albums/zz152/adonventer/car005.jpg

[Stephy]

This is going to be all sorts of epic...

[adonventer]

now the fun starts. we are busy with everything just waiting for the crankshaft.

[cdogg]

hows it goin any progress...

[adonventer]

ordered the valves, still waiting for the crankshaft,the motor is hanging on one mount and the head is getting a port job will make the flywheel this week and start with the right hand side mount. the boy has a girlfriend now and i am not going to work on his car if he does not help.

[mk3pete]

ordered the valves, still waiting for the crankshaft,the motor is hanging on one mount and the head is getting a port job will make the flywheel this week and start with the right hand side mount. the boy has a girlfriend now and i am not going to work on his car if he does not help.
ahhahahaha lol...........

[adonventer]

This is our progress so far... more pics to come when the nose arrives

http://www.vwwatercooled.com.au/forums/images/imported/2010/09/car0231-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2010/09/car022-1.jpg

[adonventer]

New nose arrived today - Yeah to Stephy in tassie. Angle eye are going to make this little number a hit. Valves from US also arrived today, just waiting on that crank - South African postal services has never been quick !!!!

Parts coming from all over the world, just to name a few.

Tasmania --- Bumper, grill, angle eyes & spot lights.
U.S.A --- Valves, piston and rods, clutch
South Africa --- Crank shaft

Still need
Cable shift gear lever (Neverlands)
Brakes & Suspension (Neverlands - but still looking)
Australia --- Turbo

[Dscott]

FARKN AWESOME STUFF, i am following this with intent!

D

[GoLfMan]

so did that basically just bolt in there?!?!

:eek:

[adonventer]

i had to make the bracket and moved the gearbox 48mm forward and now it looks like i can go 15mm to the right facing the motor, but if i have enough clearance for the waterpump pulleys i will leave it just the way it is.

[Stephy]

LOVE!!!!!! Love Love Love!!!!!! I'm glad everything arrived safely!

[adonventer]

yep thanks a lot, the boy is very happy and now he needs to decide if he wants to build car or hang out with the clowns.

[GoLfMan]

what drive shafts are you using? Stock Polo or mk4 golf ones?

Loving it!

[adonventer]

i dont like the idea of shortening the side shafts so will make a set from en36 and have it liquid nitride if that is how you spell it, will see what the difference is between the splines diameters , still have to find inner cv joints but that will have to wait as we are busy buying all the motor goodies.

[adonventer]

This is us - finally one mounting is sorted. Now for the other......taking shape slowly


http://www.vwwatercooled.com.au/forums/images/imported/2010/10/car018-2.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2010/10/car017-2.jpg

[Dscott]

nice 1 :) what a beast.

[adonventer]

This is with both the engine mountings fitted. Now busy with the front engine mount and rear stabilizers. Then we can begin building the engine. Slow going but getting there :)

http://i823.photobucket.com/albums/zz152/adonventer/car017-1.jpg
http://i823.photobucket.com/albums/zz152/adonventer/car011-1.jpg
http://i823.photobucket.com/albums/zz152/adonventer/car018.jpg

[Dscott]

good news!! keep it up

[GoLfMan]

keep it coming, this is looking great!

[cdogg]

i wouldnt say slow looks like its coming together nicely...

[Golf Loon]

What intake manifold is that with the inlet on the passenger side?
I could use that to neaten up my rocco intercooling pipework.

[adonventer]

it is a home made one, used the audi runners and just made the rest. just have to find a good throttle body for the thing now. our crankshaft has finely arrived now to find the correct rods and pistons.

[jayjay]

That's looking really good guys. Some quality home machining. :)

Matt, you could use an s3 inlet manifold. they come off from the pass side.

[GoLfMan]

What intake manifold is that with the inlet on the passenger side?
I could use that to neaten up my rocco intercooling pipework.

custom made mate :)

[adonventer]

Hey guys here are some more pics.
We have the new crank (knife edged) and the old one.
And the head has been ported by our friend Pieter Wilkens and will be finished when his flow bench arrives from SA. The seats still have to be cut.

http://i823.photobucket.com/albums/zz152/adonventer/DSC_0208.jpg
http://i823.photobucket.com/albums/zz152/adonventer/DSC_0220.jpg
http://i823.photobucket.com/albums/zz152/adonventer/DSC_0219.jpg
http://i823.photobucket.com/albums/zz152/adonventer/DSC_0221.jpg
[IMG]http://i823.photobucket.com/albums/zz152/adonventer/DSC_0217.jpg
[IMG]http://i823.photobucket.com/albums/zz152/adonventer/DSC_0210.jpg
http://i823.photobucket.com/albums/zz152/adonventer/DSC_0215.jpg

[Water Boy]

Wow you can see the big different with the knife edging.

[adonventer]

crank still needs to be polished shot peened and tempered.

[cdogg]

hey hows it goin any updates???

[adonventer]

big dreams are happening,we might be scrapping the current project and redo the complete build. will now soon if we can get our base to start with and is still busy machining new parts as my son is now my apprentice.

[adonventer]

New Project..............

Polo will now be 2.1 TS3

Alot of work to do but we are up for the challenge.

[Stephy]

Serious?
Let us know how it all goes :)

[adonventer]

will start as soon as we get our s3 ,hope we can pull it off

[adonventer]

we are currently making parts for a remote oil filter setup and dry sump.if anybody knows of a rust free cheap beetle in wa my friend is looking for one to fit his 16v turbo motor in as he had one in south africa.

[adonventer]

if there is anybody out there looking at this we are looking for a damaged scapped or unusable 20v head big port or small port, that is in your way please let us know and if it is in the peth or mandurah area or bunburry we will pick it up want to play with the ports on a flow bench.

[GoLfMan]

MORE photos :D

[adonventer]

we are at a stand still as i am cripple for a while and my son will pay his last payment on the s3 today. then we will have to get the chassis to our place and that will take some time ,

[sports racer]

we are at a stand still as i am cripple for a while and my son will pay his last payment on the s3 today. then we will have to get the chassis to our place and that will take some time ,

Hope you're back on your feet, not just because we want to know about any progress but mainly because anyone crazy enough to tackle this sort of work is pretty awesome in my book.

Cheers

Paul

[adonventer]

thanks i started to think we are stupid, but as soon as the car arrive we will go flat speed ahead. the head will be on the flow bench shortly and we will be able to see in what direction we will be going. made a new intake manifold so we can test the 2 off them together. will modify the waste gate this week and the remote oil filter.

[GoLfMan]

awesome to see this is still going on! Really looking forward to progress pics :)

[adonventer]

this project will have to work we have already spend lots of money and brain damage, then my friend is busy with a seat 16v project as he could not find a decent beetle. thanks for the interest we will have to work faster

[sports racer]

If all it takes is more interest to make you work faster I'll update this thread every 5 minutes. :)

Took my 96 Polo for a run yesterday for the 1st time in a year (I've been driving the MK2 all that time). After sitting in the garden gathering cobwebs for 12 months it fired up straight away - just needed jumper leads 'cause the battery was flat. I couldn't believe how easy it was. Nice to drive too after a year driving a low (stiff) MK2. The Polo is lowered but still feels soft (compared to the MK2). Goes hard through corners too, like the MK2, but soooo much more refined. Hard to believe they are only 6 years apart.

Looking forward to seeing how yours goes, these cars are so underrated. All they need is a bit more power.

Cheers

Paul

[adonventer]

i agree a polo handles like a dream, we are busy playing with a kkk wastegate i prefer the older stuff and in has been working the last 10 years with no hassles.

[GoLfMan]

i miss the handling of my 6n Polo. They certainly do make you giggle when you hit the bends. Mine used to 3 wheel around corners everywhere! Too bad about the crap powerplant :( (which is why im watching this with interest :D)

[adonventer]

we are going all out for hp, not sure what we will get at the wheels but we sure are going to try for big numbers. we are looking at hybrid turbos the works luckily my friend have a lot of turbo experience and have modified many a turbos

[noone]

...........................

[adonventer]

not sure what all the dots mean

[adonventer]

anybody knows what the specs are on the best and fastest vw and audi motors in australia?

[adonventer]

hey guys here is are some pics of the head being tested on a flow bench. There is the reading we got and valve seat throat needs to be opened 1mm and the valve seats still needs to be cut, we will keep you posted on our final reading when we have it :)

http://i823.photobucket.com/albums/zz152/adonventer/Pietsefotos001.jpg

http://i823.photobucket.com/albums/zz152/adonventer/Pietsefotos012.jpg

[philthy]

anybody knows what the specs are on the best and fastest vw and audi motors in australia?

There's a guy with a carbon fibre bodied lotus with a 1.9L 20 valve in it that goes quite well.. maybe have a dig around on google for that

[Water Boy]

anybody knows what the specs are on the best and fastest vw and audi motors in australia?

- Lucas with a A4 1.8t.
- Valver's Mk1
- Tim from Geelong and his Mk1 kjet turbo
- Jay's Mk4 r32 from QLD
Thats just a few.

Id suggest you have a look at some of the results from recent dyno days. Plenty of VAg cars pushing over 200kw's atw.

[adonventer]

Hey guys

here are some pics of us cutting the seats, we will be putting it on the flow bench again to test it to see if we could get any better flow.

http://i823.photobucket.com/albums/zz152/adonventer/IMG_1283.jpg
http://i823.photobucket.com/albums/zz152/adonventer/IMG_1284.jpg
http://i823.photobucket.com/albums/zz152/adonventer/IMG_1285.jpg

[Water Boy]

Any more updates?

[adonventer]

Hey guys here is some pics of the 2 cars we are using to make one VW A3 beast.

http://i823.photobucket.com/albums/zz152/adonventer/DSC_0278.jpg
http://i823.photobucket.com/albums/zz152/adonventer/DSC_0277.jpg
http://i823.photobucket.com/albums/zz152/adonventer/DSC_0276.jpg

The gearbox in the yellow car is the 6 speed manual from the A3.

[sports racer]

Glad to see this is still progressing.

[GoLfMan]

Glad to see this is still progressing.
x2 should be pretty bonkers when its done!

[Water Boy]

Hows this going?

[adonventer]

Still going will finish this project......

[GoLfMan]

Still going will finish this project......

keep up posted!!

[sports racer]

Any progress?

[adonventer]

still waiting for the letter from department of transport and car has to go for stability test

[adonventer]

Hey guys we are still working on the car, just been a little slow going with money and time at the moment but we are still working on it.

[adonventer]

Hey guys, still making progress.

We have gotten a rotisserie and just busy trying to get the car to stay on it. We have also gotten some 17" rims for it this week. Here are some pics.

http://i699.photobucket.com/albums/vv351/ondie18/IMG_0939_zps95e94940.jpg
http://i699.photobucket.com/albums/vv351/ondie18/IMG_0941_zps6d281887.jpg

[adonventer]

Hi, Still going been a bit slow as we have not had much time at work to do more polo related work. But we got some spare time recently and managed to shorten the A3 rear drive train frame. Here are some pictures of it on the mill.

http://i699.photobucket.com/albums/vv351/ondie18/IMG_1605_zps9ff3fb07.jpghttp://i699.photobucket.com/albums/vv351/ondie18/IMG_1606_zps2ee392de.jpghttp://i699.photobucket.com/albums/vv351/ondie18/IMG_1616_zps1cc06c4e.jpghttp://i699.photobucket.com/albums/vv351/ondie18/IMG_1618_zps1604ce40.jpghttp://i699.photobucket.com/albums/vv351/ondie18/IMG_1620_zps6f8a7036.jpghttp://i699.photobucket.com/albums/vv351/ondie18/IMG_1625_zps35936358.jpg

[adonventer]

Just finished checking the frame inside the car where we are going to mount it.

http://i699.photobucket.com/albums/vv351/ondie18/IMG_1992_zpsdca990ba.jpg
http://i699.photobucket.com/albums/vv351/ondie18/IMG_1991_zpsa9b23d09.jpg

[vwthunder]

OMG

Just noticed what your doing lol

I love you hahahaha, no i always dreamed of making my car all wheel drive, there is a 9n3 in the UK which the guy got half way, dont think he ever finished it, he had problems with the rear arms hitting on the chassis/wheel well

[Jarred]

awesome!

[Jmac]

This is real modding man, really nice work. I think im going well doing my 6N2, ill be happy just to have it running lol, but this is upper level stuff. Totally awesome guys, i seriously cant wait till u have this thing rollin. Super exciting.
I think Jarreds post just about sums it up without having to say anything ^^^^^^^
Cheers
Jmac

[vwthunder]

Can you do my car next lol

This is my dream !!!!!!

All wheel drive with 400hp, I have the Show but need the Go

[sports racer]

Loving it!

[adonventer]

Hi Guys

Just at this moment got the dash out as we are getting ready for the panel beater to come swap the tunnels around. Will post some pictures tomorrow.

[GoLfMan]

been a while since I've checked this and I come back to an AWD conversion!? Nice work!

[gldgti]

Nice job on that rear subframe!

This is going to be such a great car - I''ve seen a couple of AWD 6N's on youtube with various powerplants but one in Australia is just fantastic!

[Jmac]

Agreed its a cracker

[adonventer]

Hi guys

Long time since we have posted or really done much to the car. Mum and dad are busy renovating the house and I've had an ACL recon so things have slowed a bit but we have done a bit more work over the last week. Let's just say that we are slow movers haha

Here are some pictures of the engine mounting.
8327832883298330

[CDR20]

Looking good..

[Jmac]

Im with you guys, keep in touch. Itll be a work of art. Mines is touch and go whether itll be go or no, I still deep inside say go but helping a mate needing a car. Will update when I know for sure. Will email you soon
All the best
Jmac

[Eddy]

Hoyhoy.

Very nice, me like.

[sports racer]

That's some seriously good work making those mounts.

[littlegldgti]

Any update on progress? :D

[adonventer]

Hi guys

We know it's been a long time since we've posted or even done anything to the car. Life and other projects has gotten in be way a little but we're back on track and looking at finishing this overdue project off hopefully next year.

Now I can see photos on my phone so I'll try pick up from where we last posted, we managed to get our S3 floor pan welded into the chassis which came out a lot better than we could have dreamed.

We have decided to move away from the 20V engine since starting and we think we're onto something a bit easier/better from a build perspective, don't want to give too much away now but once I get a few pictures I'll post them up.

We will be a lot more active starting around mid November as we're both got a bit on until then but we are back and ready to finish up what we started.

Andy & Ondrej

[adonventer]

http://www.vwwatercooled.com.au/forums/images/imported/2017/10/d91b7c59f1eb44435064209fe36b160c-1.jpg

Here is a preview of the new direction we're going in with this project. Hoping to get it all under way mid November.

Ondrej