fuel injectors??

[alex g]

what is the size to suit 16v bungs?? have had two sets now and both havent fitted, one being a bosch set???

any help

[Golf Loon]

Have you taken out the threaded plastic bits? I think its a 12mm hex socket to remove them and then there is a thread.

[h100vw]

Might want to swap the Kjet inserts for digifant ones. Not much to buy from VW. When I did the opposite. Fitted a Kjet head to a digifant motor.
Gavin

[alex g]

sorry guys i have confused the issue, i have fitted new bungs and had a set of bosch porsche fitment injectors but the lower section is larger

what i am looking to find out is how do you know the size of the injector to suit the 16v bunges and all vw bungs for that matter

[h100vw]

Just clarify what injectors you are using, are they electronic or mechanical?

Post a picture of your injectors as well for us to look at. I am wondering if they are not the same dimensions as a digifant one.

Gavin

[alex g]

electonic

i need the same body as digi ones but something that pushes a little more fuel

[Valver.]

The G60 ones would do the job, I'd think :)

[aussieg60]

This site gives you Bosch numbers and flow rates for particular injectors that maybe usefull to you http://home.hetnet.nl/~sfctuning/techinfo.htm#injector

[abreut]

On my 16v I used the plastic injector seats I think they are off a G60 and most injectors seem to fit inside them. They just screw into your 16v manifold. The only thing I have found is that with the 16v port design some of the injectors designed for 8v's have the wrong spray pattern. One set I used was wetting the walls pretty bad and it gave me crap throttle response. You could see what injectors the 20vt's use, they would probably have a similar spray pattern.