PDA

View Full Version : VR6 Coolant -G11 vs G12



RedVR6
20-02-2010, 10:29 PM
Hi,

Am just about to replace the coolant in my (Passat) VR6 and realise I've been sold G12 ++ when the service book specifies G11 only.

I believe it is ok to run the G12++ but not to mix it.

Can anyone confirm and does anyone know the diff b/w G11 & G12?

MattyT
20-02-2010, 10:54 PM
I dont know the diff, but I have G12 in my golf vr6 and its just dandy. It actually runs a tad cooler, which is probably a good thing in Perth at least :)

stotto
20-02-2010, 11:10 PM
I have G12++ in my vr6 golf, and it runs fine.

From memory G11 and G12 shouldnt be mixed,im not sure about G12++.

Just run a radiator flush through it befor putting the G12++ in.

Jmac
23-02-2010, 10:40 PM
G11 and 12 cant be mixed however G12 + can guys no dramas, its the juice
Jmac

Tim
23-02-2010, 10:50 PM
I believe its the case that G11 and G12 have been superseded. as above just flush thoroughly and use the new stuff

RedVR6
24-02-2010, 06:46 PM
Thanks folks, will flush and fill.