MiKe1_golf
09-09-2009, 08:04 PM
no where near being a vw but thought it was worth a show in here.
needs to be a bit lower but this is still pretty cool.
http://www.killbillet.com/attachment.php?attachmentid=33149&d=1240629657
http://www.killbillet.com/attachment.php?attachmentid=33148&d=1240629555
http://www.killbillet.com/attachment.php?attachmentid=33152&d=1240630328
http://www.killbillet.com/attachment.php?attachmentid=33154&d=1240630146
http://www.killbillet.com/attachment.php?attachmentid=33156&d=1240630572
http://www.killbillet.com/attachment.php?attachmentid=33157&d=1240630691
http://www.killbillet.com/attachment.php?attachmentid=33158&d=1240630821
http://www.killbillet.com/attachment.php?attachmentid=33311&d=1240826283
here are tha Build Details:::
79' DatsuN- 620- BulletsiDe>>
4" traditional body drop
1 1/4" stock floor
IRS from a 1980 Datsun 280Z
Cantilever front suspension (in Cab)
4" Chop Top Roof
2" Horizontal Body Section
10" Bed Bob
Full Back half ( 4 x 2 ) box Tubing
Water Jet cut Custom Cantilever Bracketz (front & back)
Homeade Front Upper & Lower Control Armz..
All Custom Crossmemberz
Rear Cantilever Shockz
Shortened Steering Column
Slam Specialtiez Bagz
2-3 Gallon Air Tankz
Burlap Gunny Sack Seatz & door Panelz
Coker White Wallz
Powdercoated Wheelz, and Engine Componentz
Body iz Soda Blasted to bare metal, and Clearcoated
Truck Layz Door SO HARD, that it'z almost impossible 2 open doorz when completly layed out.....lol
Don't know what I scrape more... My frame, or tha bottom of tha door edge...
This truck is a real headturner, not yur everyday minitruck, but I can't even take it to tha' gas station, without 10 people gathering around it, and checkin' it out.... jus tha fact it iz SO slammed, people are mind boggled it can even drive!! they stand in confusion, and disbelief, when I drive it off!! lol
not the build thread but more info here
http://www.killbillet.com/showthread.php?t=16277
needs to be a bit lower but this is still pretty cool.
http://www.killbillet.com/attachment.php?attachmentid=33149&d=1240629657
http://www.killbillet.com/attachment.php?attachmentid=33148&d=1240629555
http://www.killbillet.com/attachment.php?attachmentid=33152&d=1240630328
http://www.killbillet.com/attachment.php?attachmentid=33154&d=1240630146
http://www.killbillet.com/attachment.php?attachmentid=33156&d=1240630572
http://www.killbillet.com/attachment.php?attachmentid=33157&d=1240630691
http://www.killbillet.com/attachment.php?attachmentid=33158&d=1240630821
http://www.killbillet.com/attachment.php?attachmentid=33311&d=1240826283
here are tha Build Details:::
79' DatsuN- 620- BulletsiDe>>
4" traditional body drop
1 1/4" stock floor
IRS from a 1980 Datsun 280Z
Cantilever front suspension (in Cab)
4" Chop Top Roof
2" Horizontal Body Section
10" Bed Bob
Full Back half ( 4 x 2 ) box Tubing
Water Jet cut Custom Cantilever Bracketz (front & back)
Homeade Front Upper & Lower Control Armz..
All Custom Crossmemberz
Rear Cantilever Shockz
Shortened Steering Column
Slam Specialtiez Bagz
2-3 Gallon Air Tankz
Burlap Gunny Sack Seatz & door Panelz
Coker White Wallz
Powdercoated Wheelz, and Engine Componentz
Body iz Soda Blasted to bare metal, and Clearcoated
Truck Layz Door SO HARD, that it'z almost impossible 2 open doorz when completly layed out.....lol
Don't know what I scrape more... My frame, or tha bottom of tha door edge...
This truck is a real headturner, not yur everyday minitruck, but I can't even take it to tha' gas station, without 10 people gathering around it, and checkin' it out.... jus tha fact it iz SO slammed, people are mind boggled it can even drive!! they stand in confusion, and disbelief, when I drive it off!! lol
not the build thread but more info here
http://www.killbillet.com/showthread.php?t=16277