PDA

View Full Version : NSW Wheel Spacers 04 R32



JVLR32
05-09-2009, 08:41 AM
Wheel spacers for my R32.....any forsale gentlemen:checkeredflag:

John 0409125965

fuzion
05-09-2009, 09:43 AM
tuv non tuv approved
size
with or without bolts ? :p

JVLR32
05-09-2009, 10:12 AM
tuv non tuv approved
size
with or without bolts ? :pas wide as i can get it...

i have the original 18s R32 rims...like to get the rims right on the lip.
I would like the kit bolts spacers

JVLR32
05-09-2009, 03:04 PM
yeah thanks boys....i had a look at Als spacers,they look around 15mm

goodfella
05-09-2009, 03:12 PM
with AUD>USD exchange rate around .84c... ecs might be an option, but frieght might be exxy given weight

fuzion
05-09-2009, 03:32 PM
If you get 20mm i would get spacers that bolt onto your hub, then your wheel onto the spacer like what i had previously before changed wheels.

12mm on front 20-22 on rear!

JVLR32
05-09-2009, 04:52 PM
so no one makes them here in Australia?

Manaz
05-09-2009, 05:08 PM
so no one makes them here in Australia?

Not road legal in most states here, so unlikely.

dylan8
05-09-2009, 05:15 PM
Not road legal in most states here, so unlikely.

are there any spacers legal in australia...? so many people seem and also so many places sell them but there not legal? or have i missed something?

Tim
05-09-2009, 05:26 PM
what size spacers are you after?

I may be able to sort you out with 10mm but only if youre running the OEM wheels.
Either that or I have 16mm spacers as well which will be suitable for OEM or aftermarket wheels.
I dont do longer wheel bolts though which will be required. They should be available at specialist mag wheel stores like www.magwheelcentre.com.au who were able to sort me out with longer bolts for my mk3 spacers.

Shoot me through an email to sales@dubaddiction.com.au if you need more info.

Mr. JLT
05-09-2009, 05:28 PM
is this what you looking for? Mine are 24mm made by H&R and factory vw lugs work, also try raderwerks talk to Russ or JJ- I have a few sets i use with different wheels 3mm,5mm,(8mm,10mm,18mm require longer bolts) and then i have a few sets of adapters 20mm,25mm,30mm. Cheers J

http://i58.photobucket.com/albums/g270/BIGDUB1/P9054830.jpg

Tim
05-09-2009, 05:31 PM
are there any spacers legal in australia...? so many people seem and also so many places sell them but there not legal? or have i missed something?

In most states spacers are only legal if they were supplied by the manufacturer as is the case with some porsche models. If a similar car did not pass ADR compliance with them then they wont be ADR compliant

Tim
05-09-2009, 05:34 PM
as above. If youre looking to as wide as mentioned above id only really consider H&R products. I have seen some cheap spacers come out of china where either the studs snap off or the inserts come loose

JVLR32
05-09-2009, 09:35 PM
as above. If youre looking to as wide as mentioned above id only really consider H&R products. I have seen some cheap spacers come out of china where either the studs snap off or the inserts come looseTim pm sent

JVLR32
05-09-2009, 09:57 PM
Also like to say boys all the info.....has been goodly:banana:

JVLR32
06-09-2009, 01:39 PM
THANKS Tim from Dubaddiction...really quick service:google: