Simmons B45 4x100 [Archive] - VWWatercooled Australia

RedMk2Gti

11-08-2009, 11:35 AM

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&frommaketrack=true&item=290338286762&viewitem=&salenotsupported

It'll look cool in Mk1, would it fit ?

mikinoz

11-08-2009, 11:43 AM

Yes, give or take some offset for the look you wanted to achieve.

rayray086

11-08-2009, 11:44 AM

Can't see why not Eric. Find out what the centrebore is and if it's 57.1mm or higher, then it'll fit without a problem. If it's lower, then they can be machined out further so they'll fit.

Jarred

11-08-2009, 11:44 AM

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&frommaketrack=true&item=290338286762&viewitem=&salenotsupported

It'll look cool in Mk1, would it fit ?

Depends on what suspension the mk 1 has, what offset the wheels are and the x-factor (caliper offset, for brake caliper clearance)

I'm sure they could be made to fit with spacers if they didn't fit straight on. anything's possible!
tyre's might be too big too, depending on final offset.

It'd be nice to try before you buy though. Or atleast find out what they came off.

Add: They should also be 3 piece, so technically, you could be bigger lips and what not and make custom sizes/fitments.