94' Golf VR6

[tassie_euro_mk1]

hey everyone.

Very Regretful sale of my much loved 1994 VR6. Many of you already know the car and the mods it has. Selling only because i need the money for university text books, equipment and other various things.

Alot of money has gone into the VR in the time I have owned it.

anyway here is the list of mods and the oem parts I have replaced.

Engine

*181,000ks
*Timing chains and guides have been replaced late last year. During this process I had the valves replaced as well as the stem seals, etc...
*Powerchip
*Polished Inlet manifold
*BMC CDA
*RSD adjustable fuel pressure regulator
*Black Samco hose kit
*Magnecore leads
*MSD ignition setup
*New Air Flow Sensor
*New coolant crack pipe
*New thermostat housing
*New auxillary water pump
*Full cat back Remus exhaust
*Sachs clutch

Exterior

*Metalic Black
*Euro VR lip
*Badgeless grill
*Mk4 look headlights
*Kamie bumper air ducts
*Hella tinted front indicators
*Inpro tinted side indicators

Interior

*Yellow leather interior
*Dub Design Industries back lit dials
*MK4 R32 leather gear knob and boot
*42 Draft Design gauge holder
*VDO oil pressure guage
*US spec mk3 leather steering wheel
*Glovebox
*Alpine Ipod head unit
*Alpine Type R speakers
*New drivers side window reg and motor
*Euro headlight swith, with front and rear fog light

Suspension/Wheels

*Koni yellow adjustable shocks
*Eibach (black) springs
*Eibach front strut brace
*Rear strut brace
*Polyurethane control arm bushes
*Rare 17x7.5 BBS RN's
*312mm brake upgrade (possibly from an early TT)

A few things left to do...

*The aircon does not work. Being in tassie I never had the need for it so I have never checked out whats wrong.
*I have a brand new heater core for it but havnt installed it. (currently bypassed)
*The front bumper has seen better days. It has stone chips and so does the bonnet.
*Rear right hand side window doesnt go down. I havnt looked at it because I rarely have anyone in the back seat


All in all the car runs great and sounds fantastic with that Remus exhaust. Easily does 110 in second just before reaching its red line. The new MSD coil system works well. It seems to idle smoother. I have never dynoed it but at a guess if a standard VR pulls around 174hp, this one could well be around 190-200 mark, but thats just a guess :biggrin:

Im after $9,500. Sorry but I will NOT seperate parts. Any questions please feel free to ask.

Please, serious enquiries only!

Thankyou

http://www.vwwatercooled.com.au/forums/images/imported/2009/07/DSC_1359-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2008/11/DSC_1096-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2008/11/DSC_1101-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2008/11/DSC_1105-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2008/11/DSC_1108-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2008/11/DSC_1072-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2008/11/DSC_1080-1.jpg

http://www.vwwatercooled.com.au/forums/images/imported/2009/07/DSC_0164-1.jpg

[mk3pete]

its a shame your selling man for the work u have put in it good luck with the sale
ps where did you buy the mk4 r32 gear shifter with boot :)

[tassie_euro_mk1]

thanks mate. Better things over the horizon though, *cough* S4 *cough*;)

gear knob and boot combo from TMTUNING. Alot of the parts on the golf are from that crowd. fantastic service and easy to deal with

[mk3pete]

cool thanks mate:)

[tassie_euro_mk1]

bump.....


now on car sales.

[AusScare]

Dude saw this on carsales this arvo, it's immaculate! It was part my inspiration for wanting a vr6 in the first place, not many like yours around.

Good luck with the sale.

[Vr6_Dog]

Wow the dog is up for grabs once again...

[AusScare]

Does the airbag still work (still connected?) even though it's not the stock wheel?

[tassie_euro_mk1]

yea AusScare, air bag still works. It connects up all fine. Its and early MK3 wheel from the states. I was after a little something different but keeping the OEM+ theme and an airbag.

nothing was half done on this car. :)

[MattyT]

Sell me your:
RIMS!!!!!!!!!!!!!!!!!!!!!!!

Are those kamei's genuine?

[tassie_euro_mk1]

sorry Matty. cant do that.

I acctually have a keen buyer who's in the process of buying it.

oh and yep....Genuine Kamei's :biggrin:

[tassie_euro_mk1]

Bump
bump
bump.
for VR6...

just added an extra 6 months rego on the baby.

also just replaced the water pump. runs beautifully :biggrin:

[TazzyVR6]

Bump for Eric.
Sad to see it go. It is a fantastic car! Hope it stays in Tas! :D

[Jace]

Honestly, I'd be all over this is it wasn't for the leather. Are they custom re-trims or well-fitted overlay trims on the seats?

[MattyT]

I do believe this popped up on carsales the other day.

I take it the previous buyer fell through?

I'm still semi keen on those rims too... mmmmm

[DUB 12V]

ot but how hard it it to do the msd coil install? thanks good luck with sale looks good.

[tassie_euro_mk1]

Thanks Alex :)


Honestly, I'd be all over this is it wasn't for the leather. Are they custom re-trims or well-fitted overlay trims on the seats?

The seats are a full custom retrim. No overlays here :cool:. the drivers seat does have some wear but the rest is like new.


I do believe this popped up on carsales the other day.

I take it the previous buyer fell through?

I'm still semi keen on those rims too... mmmmm

yea Matty previous buyer fell through. still for sale


ot but how hard it it to do the msd coil install? thanks good luck with sale looks good.

MSD coil was relatively easy instal. I did my research on vortex and installed it properly with the Gruven bracket from FourSeason Tuning.

[pat_ballam08]

as soon as i manage to sell my car, i will be in contact with you... hopefully itll still be for sale =D

[tassie_euro_mk1]

price drop: $9,800

Will swap but only for an Audi 90 20v Quattro and cash adjustment. :)

a bit rare i know but just throwing it out there just in case :)



cheers

[tassie_euro_mk1]

$9,500


I can supply more pics if needed :)

[tassie_euro_mk1]

Friendly little Bump guys and girls.

I want to get the original 76 passat project underway and back on a motorbike for the summer days :)


Just a reminder that timing chains and guides have been replaced, as well as a full Samco Sport hose kit, fuel pump, air flow sensor, water pump and alot more.

VR6 with BBS, leather, Koni, Eibach, Powerchip, BMC CDA, Kamei.... whats not to like :cool:


cheers
Eric

[Ben J]

wow this things still for sale? :o if it was up in qld and i could check it out i would be VERY interested

[noom]

What does it cost to send the car to the ACT?

I have been looking for another car to replace my high milege VR6, and none just hit the spot like the VR6.

Tried Mercs, Japanese ...

[tassie_euro_mk1]

What does it cost to send the car to the ACT?

I have been looking for another car to replace my high milege VR6, and none just hit the spot like the VR6.

Tried Mercs, Japanese ...


Not sure buddy. Maybe someone nice on here can give you an approx amount?

Cant beat the VR's :)

[mikinoz]

Cheaper to fly down and drive it back.

I had one transported to Sydney from Hobart, but the company paid for it. Over $800 from memory.

[SpeciP3]

Yeah from ACT it would be cheaper to come down yourself :)

[tassie_euro_mk1]

friendly liitle bump guys and girls


I will be installing the new heater core next week :)

[Shteifen]

free bump!

if anyones in the market for a VR, having the heater core replaced is reason enough to buy it anyway!

-steve