vwthunder
25-06-2009, 12:37 PM
Getting rid of my MK3 soon, hence getting rid of all the parts I have sitting around
MK3 Lower Glovebox
Hard to find, no point putting a pic, most of you know what they look like.
Very Good condition, no key
$130 firm, I have seen these go for more
312mm rotors, Brand new RDA slotted, 5X100, was planning to do conversion on VR6, got these only a few months ago
$300 FIRM
http://www.geocities.com/tfhagan/30.jpg
http://www.geocities.com/tfhagan/31.jpg
ATE Calipers, off a later VR6
These have had 3 coats of undercoat, 3 red, and 3 clear coats (home job)
Perfect for anyone with early VR6 calipers wanting to change
Oh they have pads which look like they are new
$170
http://www.geocities.com/tfhagan/35.jpg
http://www.geocities.com/tfhagan/36.jpg
ECS stainless lines to suit later calipers (ATE)
$90
http://www.geocities.com/tfhagan/32.jpg
http://www.geocities.com/tfhagan/33.jpg
ECS Spacer and Bolt Kit
This spacer & bolt kit is so that the 312mm Audi TT brake carrier will fit correctly with the 312mm Audi TT rotor on your MK3 VR6 spindle assembly. Kit comes with
•Billet aluminum spacer
•Hardened longer brake carrier bolts
$60
http://www.geocities.com/tfhagan/34.jpg
MK3 Lower Glovebox
Hard to find, no point putting a pic, most of you know what they look like.
Very Good condition, no key
$130 firm, I have seen these go for more
312mm rotors, Brand new RDA slotted, 5X100, was planning to do conversion on VR6, got these only a few months ago
$300 FIRM
http://www.geocities.com/tfhagan/30.jpg
http://www.geocities.com/tfhagan/31.jpg
ATE Calipers, off a later VR6
These have had 3 coats of undercoat, 3 red, and 3 clear coats (home job)
Perfect for anyone with early VR6 calipers wanting to change
Oh they have pads which look like they are new
$170
http://www.geocities.com/tfhagan/35.jpg
http://www.geocities.com/tfhagan/36.jpg
ECS stainless lines to suit later calipers (ATE)
$90
http://www.geocities.com/tfhagan/32.jpg
http://www.geocities.com/tfhagan/33.jpg
ECS Spacer and Bolt Kit
This spacer & bolt kit is so that the 312mm Audi TT brake carrier will fit correctly with the 312mm Audi TT rotor on your MK3 VR6 spindle assembly. Kit comes with
•Billet aluminum spacer
•Hardened longer brake carrier bolts
$60
http://www.geocities.com/tfhagan/34.jpg