PDA

View Full Version : Attn Gangster MKIII's! Corvette Aero for sale ;)



KI11Z
27-05-2009, 12:52 PM
Click meeeeee (http://cgi.ebay.com.au/16-INCH-AERO-WHEELS-SAME-AS-CORVETTE-HDT-VK-COMMODORE_W0QQitemZ290319298773QQcmdZViewItemQQptZ AU_Car_Parts_Accessories?hash=item439860f0d5&_trksid=p3286.c0.m14&_trkparms=66%3A4%7C65%3A1%7C39%3A1%7C240%3A1318%7C 301%3A0%7C293%3A6%7C294%3A200)

http://www.vwwatercooled.com.au/forums/images/imported/2009/05/BS9r0dgBGkKGrHgoOKiUEjlLmV48BKF8Skeg_1JP-1.jpg


Inspiration . . .

http://www.vwwatercooled.com.au/forums/images/imported/2009/05/IMG_9496-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2009/05/IMG_9495-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2009/05/ah2011-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2009/05/2280906776_4f376f9096_o-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2009/05/GTI3-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2009/05/IMG_1499-2.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2009/05/june13011-2.jpg

DubSteve
27-05-2009, 12:59 PM
WTF flucks the ET on these badboys I want to bid :D

Jarred
27-05-2009, 01:54 PM
might look rad on the mk 1 actually...

Mrk_Mickey
27-05-2009, 05:54 PM
Woahhh, I'd rock them if they were polished. Otherwise i actually don't like them haha.

Water Boy
27-05-2009, 05:59 PM
Hmmmmmmmmm :biggrin:

Whubbsie
27-05-2009, 06:10 PM
might look rad on the mk 1 actually...

thats what I was thinking... any wheel gurus want to tell me if they will fit? I know they need adaptors

RhysQ
27-05-2009, 06:12 PM
sh*t looking wheels on their own or on a vette but look awesome on a slammed dub..... much cred to the FIRST person to ever try it.

dylan8
27-05-2009, 06:26 PM
;331889']sh*t looking wheels on their own or on a vette but look awesome on a slammed dub..... much cred to the FIRST person to ever try it.

I agree! hows everyone feeling about that price?

Mrk_Mickey
27-05-2009, 07:51 PM
thats what I was thinking... any wheel gurus want to tell me if they will fit? I know they need adaptors

The offset looks stupidly low already mate, I reckon you'll have a fat chance if you don't change your hubs to the right stud pattern to begin with :???:

Jarred
27-05-2009, 07:56 PM
good point there ,mickey. appears to be some low offsets there for sure.s

rayray086
27-05-2009, 09:00 PM
Actually, the 8.5" wide versions had offsets in the 40s/50s - I remember reading up on a Vortex thread about them. The 8" ones for sale on eBay, not so sure.

KI11Z
28-05-2009, 01:04 AM
The guy may have mis-measured? I've found specs on the net to be 16x8.5 et38? anyone confirm . . . .

:edit: More research reveals an offset of 32mm and 16x8.5, running the minimum 15mm adapters would bring the offset down to 17! these specs would explain the poke on the above dubs!

jayjay
28-05-2009, 01:16 AM
20mm adapters at that offset would mean a ridiculous mk1. mk3 on the other hand.... orsm.

Jarred
28-05-2009, 10:10 AM
38-15 is 23..... not 17. But going with a 20mm spacer. final ET of 18, which might not actually be low enough to clear a mk 1 with coils, just cause it's such a wide wheel.

WABIT
28-05-2009, 01:32 PM
you can clear coilovers with ET18 easy!! 16x8 not a problem i had 16x7 with a et of 25 and they cleared, the guards will be a diffrent issue though, youll need to roll them

dom

KI11Z
29-05-2009, 01:55 AM
38-15 is 23..... not 17. But going with a 20mm spacer. final ET of 18, which might not actually be low enough to clear a mk 1 with coils, just cause it's such a wide wheel.

ummmm . . .

The guy may have mis-measured? I've found specs on the net to be 16x8.5 et38? anyone confirm . . . .

:edit: More research reveals an offset of 32mm and 16x8.5, running the minimum 15mm adapters would bring the offset down to 17! these specs would explain the poke on the above dubs!

:duh: post says 32 - 15 not 38 . . . ;)

Jarred
29-05-2009, 10:21 AM
ooospy. I missed the edit. I just saw the first 38 and went with that obviously.

KI11Z
29-05-2009, 11:21 AM
allll, goooooood . . . . . .

SO WHOS BUYING THEM!!!!

someone better! I would if i could :frown: