PDA

View Full Version : I told you not to leave that there...


Preen59
07-05-2009, 09:45 PM
One of the apprentices at work put a frame on the welding bench where one of the boys was welding up some interlock assemblies..

After telling him twice to move it, he didn't.

Solution?

http://i280.photobucket.com/albums/kk182/preen59/05052009540.jpg

Weld it to the bench. Take that! hahaha! :biggrin: :wasntme:
polo_spec_d
07-05-2009, 09:50 PM
Haha nice move, ive seen a young boiler maker's boots welded to a work bench before lol.
Preen59
07-05-2009, 09:56 PM
Haha nice move, ive seen a young boiler maker's boots welded to a work bench before lol.

Hehe its a fridge factory and we use polyurethane foam.. So you can only imagine the pranks you can pull with that ****. :biggrin:
polo_spec_d
07-05-2009, 10:14 PM
LOL, yeah we use this cement lined steel pipe (mscl) the fights we have with the cement hehe.
Jarred
07-05-2009, 10:35 PM
hahahaha

smooth moves Pdogg
Mrk_Mickey
08-05-2009, 01:10 AM
lol nice...hopefully he'll realise who he should be listening to!
BTJ
10-05-2009, 08:33 PM
cant see the pic but sounds like a good laugh.
gldgti
10-05-2009, 09:54 PM
"and the apprentice had his frame welded to the bench by his supervisor while he was not looking... and there was much rejoycing..."

"and the apprentice said that Preen was a 'rotten bastard'... and he careth not."
Preen59
10-05-2009, 09:59 PM
"and the apprentice had his frame welded to the bench by his supervisor while he was not looking... and there was much rejoycing..."

"and the apprentice said that Preen was a 'rotten bastard'... and he careth not."

Hahaha. I didn't weld it to the bench. Leeroy did. I did, however, watch and i found it very amusing... :wasntme: