Brand New 15" VW OEM wheel

[RedMk2Gti]

4x100, 15x7J, ET40. Brand new, fresh from oven, has never installed. Pictures tell everything.

Asking for $500.

[Mrk_Mickey]

Sorry to clog the thread up, but can I ask what it came from? It's a very good looking wheel but 4x100 means it's def not on mk4's...

[RedMk2Gti]

Sorry to clog the thread up, but can I ask what it came from? It's a very good looking wheel but 4x100 means it's def not on mk4's...

Came from dealer NOS, I suppose it was a Mk3 option wheel , I was going to put it in my Mk1 but now plan is changed.

[Coxy09]

So are you saying it would fit on a Mk 3 VR6? Are they a heavy rim or fairly light?

[Mrk_Mickey]

The PCD is 4x100, and VR6's are 5x100 so unfortunately not. It's unfortunate because I reckon they'd look great on a VR6...and I'm not sure if this is correct but being a VW wheel I assume they would be ever so slightly on the heavy side because motorsport wasn't what these rims were being used for.

Sorry OP, is this actually ONE or FOUR wheels? It's a bit unclear :S

[RedMk2Gti]

Sorry OP, is this actually ONE or FOUR wheels? It's a bit unclear :S

Didn't you see the picture of 4 wheels ? I said picture tells everything and I'm not that silly to sell one wheel for $500 :)
This is the last comment, to avoid scolding from admin/mod, please PM if you are interested, no more question in here pls.

[Golf Loon]

The first year of Mk4 1.6s had a 4x100 stud pattern which may be where these wheels came from.

Or a Mk3.5 Cabrio.

Either way, good looking wheels.

They would look good on a Mk1, 2 or 3 good luck with the sale.

[shami]

anyone know what these would look like on a mk3?

[Bug_racer]

The first year of Mk4 1.6s had a 4x100 stud pattern which may be where these wheels came from.

Or a Mk3.5 Cabrio.

Either way, good looking wheels.

They would look good on a Mk1, 2 or 3 good luck with the sale.

I was working at a dealer at the time and no mk4 Golf had 4 stud wheels . The Golf 3.5 Cabriolet ran 14 inch wheels . These wheels were an option on the 2001 polo

[DVR68U]

my mate drives around a 1.6l mk4 golf that came with 4x100 stud pattern.

[Bug_racer]

my mate drives around a 1.6l mk4 golf that came with 4x100 stud pattern.

PM me his vin number please .

[gtimk5]

Didn't you see the picture of 4 wheels ? I said picture tells everything and I'm not that silly to sell one wheel for $500 :)
This is the last comment, to avoid scolding from admin/mod, please PM if you are interested, no more question in here pls.

Can you others read? PM if interested eh??
Dicussion goes in the rellevent sections further up the main menu page.
Thanks, Andrew

[RedMk2Gti]

What andrew said, but thanks for the bump guys :)

[RedMk2Gti]

One more bump, then I'll decide if I put it in my Mk1 or not.

[Bug_racer]

my mate drives around a 1.6l mk4 golf that came with 4x100 stud pattern.

I spoke to VW and they do not know of any mk4 with 4 stud wheels in Australia that came from the factory like that . I guess it might be like the VR6 in 3 door mk3's that are about , or the mk3 with no airbags . Someone did a conversion on it at some point

[brad]

The Golf 3.5 Cabriolet ran 14 inch wheels . These wheels were an option on the 2001 polo
But 15" rims were an option. I remember reading it in the owners manual for mine..

[Bug_racer]

Yes they were optional , you'll find there are optional wheels usually 1 inch larger than what comes on the car from factory


But 15" rims were an option. I remember reading it in the owners manual for mine..