5x100 17inch BBS wheels

[WABIT]

http://cgi.ebay.com.au/BBS-17x7-rims-with-Bridgestone-Potenza-Tyres-set-of-4_W0QQitemZ120412993505QQihZ002QQcategoryZ66483QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem

[madglf3]

Damnit! Why couldn't subaru have specified their cars to have offsets in the 30-40 range.

I have seen a set of these on a GTI polo, they looked pretty good.

[BlueVR6]

These are my wheels! check out my sig!!

All you need are some 20mm spacers and your set

A great upgrade from the factory 15's on the VR6

[BlueVR6]

http://www.vwwatercooled.com.au/forums/images/imported/2008/10/DSC00109-1.jpg

[GoLfMan]

will they fit a polo 9n no worries??
whats the offset?

[Lorenz]

They are a pretty high offset, around +45 IIRC
Isn't the CB the wrong size aswell?
Nice wheel but, looks great on VR's

[GoLfMan]

They are a pretty high offset, around +45 IIRC
Isn't the CB the wrong size aswell?
Nice wheel but, looks great on VR's

45 sounds like the standard offset of my steelies, I'd snap these up if they were a definite fit!

[Mrk_Mickey]

I don't get it...the wheels I have atm are 16x7 ET43. 2mm won't make a difference lol.

[goodfella]

Here's the facts (http://www.subaru-faq.ru/pdf/LegacyB4.pdf) (last page) .....

BBS 17x7JJ ET55 !!!

For my Bora (1010tires.com (http://www.1010tires.com/WheelOffsetCalculator.asp)):
Current Wheel Specs - Width 6.5 inches Offset 42 mm
New Wheel Specs - Width 7.0 inches Offset 55 mm

Inner Clearance: 19mm less (the inside of the wheel to the strut housing)
Outer Position: Retract by 7mm (position of the outside edge of the wheel)

So I would need at minimum 15-20mm spacers and not hubcentric!

[balkanac]

I had these on my B4. Very nice wheel!!