rayray086
19-04-2009, 01:25 AM
http://www.vgautopaints.com.au/index.html
Located at Girraween, NSW (opposite Seb's workshop). I went there with a mate yesterday. Two attendants (experienced in their trade) were there to teach us. Starting at 8am, we began with learning and using the correct filler for certain applications as well as the techniques involved. Next was the sanding process, then into the spray booth where we were taught how to setup a spray gun. Also learnt to properly prep the panel for paint, and the guys also told us about blending, which was an easier process than I first thought. We finished at around 11am, after they went through the buffing and polishing steps.
Asked a good deal of questions which they answered no problems. The whole lesson was quite hands-on. It was a good experience and would definitely recommend it to others! They hold the free lessons once every month/5 weeks.
Located at Girraween, NSW (opposite Seb's workshop). I went there with a mate yesterday. Two attendants (experienced in their trade) were there to teach us. Starting at 8am, we began with learning and using the correct filler for certain applications as well as the techniques involved. Next was the sanding process, then into the spray booth where we were taught how to setup a spray gun. Also learnt to properly prep the panel for paint, and the guys also told us about blending, which was an easier process than I first thought. We finished at around 11am, after they went through the buffing and polishing steps.
Asked a good deal of questions which they answered no problems. The whole lesson was quite hands-on. It was a good experience and would definitely recommend it to others! They hold the free lessons once every month/5 weeks.