Low profile jack, where did you get them ?

[RedMk2Gti]

I've got a aluminum 'racing' jack off eBay a few years ago, it is 900Kg rating so only can lift my Mk1, it is absolutely useless for the Mk4.
I'm hunting for a good low profile jack, at least 2000Kg rating, I'm sure many of you have one, where did you buy yours ?

[MIS.18T]

I've got a aluminum 'racing' jack off eBay a few years ago, it is 900Kg rating so only can lift my Mk1, it is absolutely useless for the Mk4.
I'm hunting for a good low profile jack, at least 2000Kg rating, I'm sure many of you have one, where did you buy yours ?

snap on do them but bring your money:eek:

[MIS.18T]

http://cgi.ebay.com.au/NEW-ALUMINIUM-TROLLEY-JACK-2-TON-RED-RACING-JACK_W0QQitemZ160319475314QQcmdZViewItemQQptZAU_Ca r_Parts_Accessories?hash=item160319475314&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

http://cgi.ebay.com.au/2200-Kg-Low-Profile-Steel-Trolley-Jack-Twin-Piston_W0QQitemZ200316189608QQcmdZViewItemQQptZAU_ Car_Parts_Accessories?hash=item200316189608&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

[RedMk2Gti]

thanks for the link MIS.18t
i'm kind of lost confident with those alumimum jack off eBay now. The toolman one is good but I rather pick something up locally. Still searching ...

oh, I wish I can own a snap on :eek:

[Mischa]

i got an ebay cheapy that goes veryyyy low same as this one http://cgi.ebay.com.au/2-5-TON-LOW-PROFILE-SERVICE-JACK_W0QQitemZ320348250619QQcmdZViewItemQQptZAU_Ca r_Parts_Accessories?hash=item320348250619&_trksid=p3911.c0.m14&_trkparms=66%3A4|65%3A1|39%3A1|240%3A1318 its not the greatest jack to have graced this earth but its large and sturdy and very low profile :) and cheap to tide you over until you find a better one. keep in mind that full low profile workshop jacks weigh 50kg, they're not supposed to be portable at all.

[The_Hawk]

snap on do them but bring your money:eek:

At least you know you will never have to buy another one :)

[RedMk2Gti]

i got an ebay cheapy that goes veryyyy low same as this one http://cgi.ebay.com.au/2-5-TON-LOW-PROFILE-SERVICE-JACK_W0QQitemZ320348250619QQcmdZViewItemQQptZAU_Ca r_Parts_Accessories?hash=item320348250619&_trksid=p3911.c0.m14&_trkparms=66%3A4|65%3A1|39%3A1|240%3A1318 its not the greatest jack to have graced this earth but its large and sturdy and very low profile :) and cheap to tide you over until you find a better one. keep in mind that full low profile workshop jacks weigh 50kg, they're not supposed to be portable at all.

It does go low, but not go high enough, only 329mm :duh: