Audi S3 brake upgared (Caliper painting)

[PoloGTi]

Hey all finaly spent some time this arvo cleaning the Audi S3 brakes i have. Spent about 2 hours with a wire brush and sand paper trying to get rid of all the dust that has been weathered into the calipers. Think i am almost there.
The Rotors are 312mm i think the standered ones are 288mm.
http://i2.photobucket.com/albums/y13/theblackgeneration/brakessizediferance.jpg
The next step is to rub down with a solvent to remove any left over grease and oil.
Ill try to paint them as soon as i get a good day.
I am told that they should fit under the 16" wheels.
Standered Brakes.
http://i2.photobucket.com/albums/y13/theblackgeneration/standeredbrakes.jpg
TT Brakes(Thanks to Guy Harding pics are from his project polo.)
Same size as S3 i balive.
http://i2.photobucket.com/albums/y13/theblackgeneration/ttbrakes.jpg
Will be taking the calpiers after painting to a Brake place to have them all checked out seals ect.
The plan then is to go for EBC green stuff pads, good fluid, Braided lines and then maybe ATE Power Rotors should have the pogo stopping in no time at all.

http://i2.photobucket.com/albums/y13/theblackgeneration/nightmountain026.jpg
Will post agin as soon as they are painted and agian once they are on the car.
Part numbers are:
Calipers: 1x 8N0 615 423 C (caliper)
1x 8N0 615 424 C (caliper)
Caliper Carriers 312mm Audi Caliper Carrier 8N0 615 425 2 EA
Rotors 312mm Audi Brake Disc 8L0 615 301 2EA

[william]

nice work look into some silver wurth spary once rotors are dirt free will stop squeeks and rotors will look like new just spray on rotor surface will run off onto pad at later date

nice work scoring some s3 calipers they are the same as the r32 but without the blue caliper paint,

like your wheels i scored a set for 1000 with rubber brand new.

falken azenis range now have 16s street sick would be worth looking into

[PoloGTi]

The R32 had 334mm (13.1") Vented Two Piece Front Rotors
Two Piston Calipers (with seperate Caliper Carrier
The S3 has a singel Piston Caliper same as the Golf MK4 GTI and i think even the MK5 may be using the same Caliper, i think the front calipers on the polo are the MK5 Golfs Rear Calipers.

[william]

the passat v6 calipers are single piston and the rotors are floating they are similar do you think they could do it also

[william]

the s3 calipers are very similar to the mk5 but with out the springs on the front they looks similar to the original polo if u look through wheel on the pic of your original caliper you can see

[PoloGTi]

Not sure i would have to have a Golf mk5 to have a look lol ill see one day.

[william]

anyway it looks nice so what is planned for it ?
it is goin to be used for race aplication or street

[h100vw]

Does the Polo not have same calipers as the S3? I know the calipers on my A3 are the same, I just got the 312 brackets and some discs.

Can't vouch for how good the Green Stuff pads I have might be, as you aren't allowed to go fast enough to need good brakes in Australia ;0).... They work ok coming down from 70!

I know the 312s on my Leon Cupra took a hammering following the custom-code flash. I had to cross the Peak district from Chesterfield back to Warrington. Some good driving roads and not too many Police.

Gavin

[PoloGTi]

Mainly street but hill climbs, track days plan is to one day, once i have enough skills is to do the duton rally. May be even Targa Tas one day just need more experience and alot of money.
Ummm from what i can see the polos front calpiers are very diferent from the S3s.

[EndlessMKI]

awesome.......don't you just love bolt-up mods.

[h100vw]

Maybe the std ones aren't 288 but 280? What thickness are they? 280s are 22mm when new, pretty sure the 288s are 25mm as are the 312s.

Gavin

[PoloGTi]

Yeah sure do i brought the brakes from a person that had upgraded to Brembos and sold me the old ones for $300. I wanted to see if they would fit my old 1.6L generation Mk4 golf but the hubs were wrong so i have had them sitting around for about a year now. It is time to bolt them onto the pogo.
My old golf.
http://i2.photobucket.com/albums/y13/theblackgeneration/daskside.jpg

[golf-kart]

^ spotted this yesterday. Cool looking Golf 4 :cool:

[PoloGTi]

Just put a few coats on the carriers and one on the calipers starting to look better.
http://www.vwwatercooled.com.au/forums/images/imported/2006/11/DSCN0547-1.jpg
http://www.vwwatercooled.com.au/forums/images/imported/2006/11/DSCN0549-1.jpg

[Vieussuex]

hey u missed a spot Rob:D

[PoloGTi]

LOL nah all painted now not sure when ill get them on the car. Went for a spirited drive behind a DC2 Integra type R was owning it power wise and exit speed just held more speed into corners then me but after 10km,s my rotors were glowing and my pads were smoking lol opps time for new fluid, rotors, calipers and pads.