16v kr help please

[Golf Loon]

Anyone know where the computer vacuum line plugs into the engine?

also the breather from the tank. I reckon this goes to the diaphram switch by the air intake.

[ausgolfer]

Well I'm not sure about the tank one, but I'm failry sure the one from the computer goes to a tee piece, one end going to the vacume line off the top of the inlet manifold, the other end going over towards the airflow meter, where it comes to another tee piece one going to one valve on the back of the airbox and the other end going to another valve on the fender side.

[h100vw]

Not sure there is a tank breather Matt. The ecu gets tee'd off the servo vac pipe IIRC. There is a picture of it in the Haynes and a pretty good one in ETKA too.
As long as it sees manifold vacuum it'll be ok.
Gavin

[Golf Loon]

Nice. Thanks guys.

[dvw16v]

Glad to hear u are making time to finish the golf if u get stuck just give me a call and ill bring my golf round should be able to work it out that way u know how it came from the factory eliminates unwanted headaches