PDA

View Full Version : Electrical Mods for Kamiq



Hillbilly
16-08-2021, 03:47 PM
So far have done the following on our new Kamiq.
Rear tails on with DRL

Module 09
Leuchte 24SL HRA 69
Leuchte func C 24 alter to Tagfahrlicht

Dimming CD 24 change to 5 Press & Hold to set the change

Leuchte 23SL HLC7
C23 alter to Tagfahrlicht

CD 23 change to 5 Press & Hold to set the change

Leuchte 20BR LA70
E 20 change to Tagfahrlicht
EF 20 change to 5 Press & Hold to set the change

Drl's off with handbrake

App on OBDEleven

Dial staging
Module 17 Dashboard
Long coding
Staging change to YES Save change DOESNT WORK On Kamiq


Dynamic High Beam Assist
Module 09 Central Electrics
Adaptations
Fernlicht Assistant
Expanded High Beam Control
Change to AFS,FLA,Fernlicht ueber AFS

Menuesteuerung Fernlichtassistent change to Present
Menuesteuerung Fernlichtassissent Werkseinstellung Change to Present

Save Changes.

Jacs8
12-06-2022, 11:39 AM
Hi Hillbilly,
We bought a new signature model to replace our 2017 Fabia in December 2021 which we are both very happy with.
Have you attempted to isolate stop/start via VCDs by any chance ?
Thanks


Sent from my iPhone using Tapatalk

Hillbilly
12-06-2022, 12:11 PM
Yes and you cant only way is with the cheater cable from Aliexpress, which I have but havent been game to pull the console trim apart to fit it You can have it for the $50 it cost me and I have photos on how to remove the trim and switch

Jacs8
13-06-2022, 07:24 AM
Thanks. Iíll look into it. Im not too keen on adding hardware to achieve this mod at this stage.


Sent from my iPhone using Tapatalk

Hillbilly
13-06-2022, 09:55 AM
Thanks. I’ll look into it. Im not too keen on adding hardware to achieve this mod at this stage.


Sent from my iPhone using Tapatalk

Its only a cable that you attach to the switch and to the connector you pull off the switch and it enables it to be turned of all the time or back to normal as you want. Its just bloody hard to get the trim off so you c
an pull the bank of switches out to insert it.

Jacs8
13-06-2022, 10:15 AM
Thanks again. Im in no hurry, Iíll look into it


Sent from my iPhone using Tapatalk

genebaby
13-06-2022, 06:33 PM
It's the only way to achieve this since 2020 sometime. They killed off the software fixes.

I got the cable and installed it in my mother's Kamiq.

I have one in my 2020 GTI as well.

In our 2019 Polo I used my OBD11 to do it.

Hillbilly
13-06-2022, 07:08 PM
It's the only way to achieve this since 2020 sometime. They killed off the software fixes.

I got the cable and installed it in my mother's Kamiq.

I have one in my 2020 GTI as well.

In our 2019 Polo I used my OBD11 to do it.

So how hard did you have to pull the trim to get it off I am reluctant to pull too hard even though a Russian guy sent me photos of him doing it