PDA

View Full Version : Glovebox removal?



Bollo
01-08-2018, 12:15 PM
Can anyone give me some tips on how to remove the glovebox?

I've taken out the top three/lower two screws. I dropped the glovebox door right down, removed the end panel from the dash and the footwell covering too but I can't find anything else holding it in place.

It feels like it should come out but I don't want to force it.

Thanks

DreamensioN
01-08-2018, 02:57 PM
Screws? There's no screws to remove the glove box in the Arteon. It's 2 bump stops and a couple of arms that just clip in.

To remove the glove box in the Arteon is the _exact_ same procedure as this: YouTube (https://www.youtube.com/watch?v=93mXhM70Cq4)

When you pull on the arms - it does take a bit of force. Just be mindful as when it comes out it will just let go - but you do have to yank on it a bit.

Bollo
01-08-2018, 03:13 PM
My bad, I should have said I want to remove the outer housing around the glovebox. I want to access the SD card reader.

Cheers

Bollo
01-08-2018, 06:08 PM
Never mind, all good. Thanks