PDA

View Full Version : Amarok Temp Gauge



Stu
28-03-2018, 10:00 AM
Hi All,
I have a 2013 Amarok Highline which only came with an engine temp warning light and no gauge. Recently the warning light has been coming on with no obvious signs of overheating and the fluid level seems fine. I was wondering if anyone had fitted a proper temp gauge and where they wired/connected it in?
Stu.

jeromeo
28-03-2018, 10:11 AM
I used an obdII device connected to my mobile to check live temperature.
Was pretty good and easy to set up.http://www.vwwatercooled.com.au/forums/images/imported/2018/03/37b15b8aaef29f2b67ac93084d91f685-1.jpg

Sent from my SM-G965F using Tapatalk

Stu
28-03-2018, 10:24 AM
That looks good. Will check it out. Saves running wires etc. Thanks.

jeromeo
28-03-2018, 10:57 AM
Don't go for really cheap one. As you don't want to damage ECU.

Sent from my SM-G965F using Tapatalk

Umai Naa!!
28-03-2018, 01:06 PM
Have the cooling system pressure tested, and check for sludge in the EGR cooler.

VWAmarok
07-04-2018, 02:46 AM
Don't go for really cheap one. As you don't want to damage ECU.

Sent from my SM-G965F using Tapatalk

You won't damage the ECU. The worst you can do is lose connectivity with the OBDII port.

Cheers

VWAmarok

jeromeo
08-04-2018, 06:52 AM
You won't damage the ECU. The worst you can do is lose connectivity with the OBDII port.

Cheers

VWAmarok

Thanks.
good to know.


Sent from my iPad using Tapatalk

Lego
19-04-2019, 05:38 PM
Hi Stu
What did you end up doing in the end?

Also, I wonder if the 2014-on speedo could be retro-fitted to the non-temp gauge Amaroks?