Traffic Sign Assist Activation

[Blackpaladin67]

Traffic Sign Assist Activation
Select Control unit 5F (Information Electrical)
Adaptation
Select channel (63) vehicle function list BAP traffic_sign_recognition_0x21
Değer=Active
Select channel (151) vehicle menu operation-menu_display_road_sign_identification
Değer=Active
Select channel (153) vehicle menu operation-menu_display_road_sign_identification_over_thresho ld_high
Değer=Active
Control unit A5 (front / advance camera)
Security access
Access Code 20103
Control unit Long Coding
Byte 1
Bit 0 Activate - "01 Traffic Sign Recognition (FTE) active"
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Bit 2 Aktivate
Control unit A5 (front / advance camera)
Adaptation
Select : channel numbers indicate end of speed limit
Importance to actively invest Show Valid suffix
View Channel Valid suffix
Corresponding value adjust default: 00100111

Sent from my SM-G935F using Tapatalk

[Blackpaladin67]

Traffic Sign Assist Activation
Select Control unit 5F (Information Electrical)
Adaptation
Select channel (63) vehicle function list BAP traffic_sign_recognition_0x21
Değer=Active
Select channel (151) vehicle menu operation-menu_display_road_sign_identification
Değer=Active
Select channel (153) vehicle menu operation-menu_display_road_sign_identification_over_thresho ld_high
Değer=Active
Control unit A5 (front / advance camera)
Security access
Access Code 20103
Control unit Long Coding
Byte 1
Bit 0 Activate - "01 Traffic Sign Recognition (FTE) active"
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Bit 2 Aktivate
Control unit A5 (front / advance camera)
Adaptation
Select : channel numbers indicate end of speed limit
Importance to actively invest Show Valid suffix
View Channel Valid suffix
Corresponding value adjust default: 00100111

Sent from my SM-G935F using TapatalkSo i access this how from my obd11 pro ? A bit lost apologies for my lack of understanding.

Sent from my SM-G935F using Tapatalk

[rjt86]

Pretty sure you’ll need VCDS for that

[DR074]

I completed DTSR with OBDEleven Pro.

You may also need to make sure the below is set;

Control Unit: A5
Adaptations: Road sign detection fusion mode: Road sign detection

This might help

[Rooboy]

This was in the Tiguan forums and worked for my Alltrack http://www.vwwatercooled.com.au/forums/f238/guide-enable-eu-specific-features-au-spec-tiguans-117741-13.html#post1226308

1.Go into Module 5F Information Electronics
2.Select Adaptations, then Vehicle_Functions_List_BAP_Gen2
3.Select menu_display_road_sign_identification_0x21, and set to Enabled
4.Select Adaptions, Vehicle_Function_Adaptations_Gen2-menu
5.Select menu_display_road_sign_identification, set to Enabled
6.Select Coding, and then select Byte 24, activate Bit 6
7.Go into Module A5 - Front Sensor Driver Assistance
8.Select Coding, and then select Byte 16, activate Bit 4
9.Go into Module 17 Instruments
10.Select Coding, then Byte 5, active bit 2
11.Go back into Module A5 - Front Sensor Driver Assistance
12.Select Adaptations, then Road sign detection fusion mode, and change to Road Sign Detection. The original is Road Sign Fusion
13.Reboot the infotainment unit

[Blackpaladin67]

You guys are juzt too good. Mine was a bit different but got there in the end. Mine has fusion , road and something called horizon to choose from. By the way no warning issues. Only bug is it dont know that its school holiday or outside of school times in 40km zones. Looks much bigger in life and super hd in real life in contrast to the pic. Thanks heaps peps.http://www.vwwatercooled.com.au/forums/images/imported/2018/01/54063d70cb48adbd2fb44db6a280f89b-1.jpg

Sent from my SM-G935F using Tapatalk

[Blackpaladin67]

Better shotshttp://www.vwwatercooled.com.au/forums/images/imported/2018/01/433037a59366fd933b37ff764f46438b-1.jpghttp://www.vwwatercooled.com.au/forums/images/imported/2018/01/3a18a1f39ace0c9efd9d9aa26c628d01-1.jpg

Sent from my SM-G935F using Tapatalk

[Pezzaano]

sorry wrong post

[FarQ]

So i access this how from my obd11 pro ? A bit lost apologies for my lack of understanding.

Sent from my SM-G935F using Tapatalk

TRAFFIC SIGN RECOGNITION:

Multimedia (5F)

Car Function List BAP Gen2

Traffic sign recognition 0x21

Activated

Multimedia (5F)

Car Function Adaptations Gen2

Menu display road sign identification

Activated

Multimedia (5F)

Long Coding -> Byte 24 -> Bit 6 (activate)

Driver Assistance (A5)

Long Coding -> Byte 16 -> Bit 4 (activate)

Dashboard (17)

Long Coding -> Byte 5 -> Bit 2 (activate)

Driver Assistance (A5)

Road sign detection fusion mode

Road sign detection

Reboot the infotainment unit (hold power button until screen goes blank)