View Full Version : Pics of our 1.8T rebuild
Guy_H
17-01-2008, 05:56 PM
Project TT is back in full swing:
New Engine is finished, new rods, new pistons, AEB head, New production intercooler piping, APR Motorsport Intake Manifold (RS4 Throttle Body) - Limited slip differentials fitted front & rear also. lets hope the tailshaft holds up :)
http://www.ozaudi.com/projectTT/new_engine/stage3+rear%20copy%20Large%20Web%20view.jpg
http://www.ozaudi.com/projectTT/new_engine/P1160158%20Large%20Web%20view.jpg
http://www.ozaudi.com/projectTT/new_engine/P1160155%20Large%20Web%20view.jpg
http://www.ozaudi.com/projectTT/new_engine/P1160153%20Large%20Web%20view.jpg
http://www.ozaudi.com/projectTT/new_engine/P1160142%20Large%20Web%20view.jpg
99gti
17-01-2008, 06:06 PM
I like where this is going ;)
gpk_gti
17-01-2008, 06:13 PM
ok,im off to the bathroom !!!!!!!!!!!!!!! :D
Golf Houso
17-01-2008, 06:39 PM
Whats this monstrosity going in?
GoLfMan
17-01-2008, 07:10 PM
Whats this monstrosity going in?
Audi TT ;)
has to be asked...
HOW MUCH POWER!!!
OilBurna
17-01-2008, 07:38 PM
very nice can't wait to see the finished product will be a beast.... is it going to be a track weapon?
99gti
17-01-2008, 07:55 PM
is it going to be a track weapon?
From guy I'd expect nothing else!
Water Boy
17-01-2008, 08:09 PM
OMG OMG thats hot :D
DaveMack
17-01-2008, 10:39 PM
I just know you'll need a test-driver Guy ... *Hand up*. :D
Dave
Guy_H
18-01-2008, 09:48 AM
Thanks Fella's - its in our TT rally car - there's a gallery here:
http://www.ozaudi.com/projectTT/gallery/
And some action pics here:
http://www.ozaudi.com/projectTT/album/
We have had it for 2 1/2 years, it was really cheap as it has done 260,000 km's.
We broke the rear tailshaft at last years QLD Dutton Rally on a launch & decided to give the motor a freshen up as it was leaking a little oil :) - with the new internals we can now push the tune upwards of 430 ~ 450hp (It was running 400hp on the stock internals with that mileage on them) - the intake manifold alone is apparently worth 35hp.
It run's Ohlins suspension, custom Camber plates (Custom lots of things!) - It was the test mule for the RHD stage 3+ kit which we export primarilly to the UK (and the crazy bastids put most of them on MKIV Golfs!).
there is some old buildup info here:
http://www.ozaudi.com/forums/showthread.php?t=7065
Here is a pic of it before we put the brakes on:
http://www.ozaudi.com/projectTT/ttbrake!.jpg
DubSteve
18-01-2008, 09:57 AM
Batman Style hook for going around corners :D
99gti
18-01-2008, 09:58 AM
Is that an Alcon special once off there guy? Another but of R&D perhaps?
DaveMack
18-01-2008, 10:09 AM
Just can't help thinking ... so much of this is interchangeable with the components of my car. :D:D:D:D
Dave
Flaps
18-01-2008, 10:54 AM
Would that intake fit on the Polo?
Guy_H
18-01-2008, 01:58 PM
Anything could go on a Polo - Its just a matter of time, money & a big demolition saw :D
The exhaust manifold, Turbo (a 28RS instead of 2871R), dowpipe & cat, and intake pipe are all the same they use for the Polo & Golf. The plumbing takes a different turn for the intercooler.
The intake manifold is really only for "built" engines as it up's the HP past internal strength safety margin. :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.