PDA

View Full Version : Tiguan Trailer assist, traffic jam assist



Brobbe
02-05-2017, 05:47 PM
I am waiting for my new Tiguan 2017.
The car has parking assistant, rear camera, lane assist and adaptive cruise control.

Is it possible to code/retrofit trailer assist?

Is it possible to code/retrofit traffic jam assist?

Thanks

zei20t
03-05-2017, 11:50 AM
I think traffic jam assist is part of ACC and Lane Assist features

I'm also told trailer assist is an additional module that performs the function. Ive been looking into this for a while now.

nickd
04-05-2017, 01:51 PM
I saw a video of his trailer assist works and honestly it looked like it would be easier/quicker to learn how to reverse a trailer yourself than to learn to use the interface.

Brobbe
11-05-2017, 08:14 PM
I think traffic jam assist is part of ACC and Lane Assist features

I'm also told trailer assist is an additional module that performs the function. Ive been looking into this for a while now.
Here in sweden it is a part of side assist and rear traffic alert, which I don't have. :(

Skickat från min SM-G950F via Tapatalk

zei20t
16-05-2017, 09:18 PM
OK, for Trailer Assist to work, you need:

Park Pilot - Not just PLA (12 sensors)
Genuine trailer hitch
Highline camera 5Q0 980 568

And some VCDS Coding

Brobbe
16-05-2017, 09:52 PM
OK, for Trailer Assist to work, you need:

PLA (12 sensors)
Genuine trailer hitch
Highline camera 5Q0 980 568

And some VCDS Coding
Ok, thanks! :)
How do I know which sensors and camera I have?

I own a genuine vcds cable.

Skickat från min SM-G950F via Tapatalk

zei20t
17-05-2017, 10:51 AM
Perform a scan of your car.

Check the HW part number of Module 6C for the camera.

Sorry, you need Park Assist - the function that will park the car for you.

Brobbe
17-05-2017, 04:43 PM
Perform a scan of your car.

Check the HW part number of Module 6C for the camera.

Sorry, you need Park Assist - the function that will park the car for you.
Ok, thanks! :)
I have park assist. :)

Skickat från min SM-G950F via Tapatalk

Brobbe
02-06-2017, 03:18 AM
I have 5Q0 980 556 B.
Do I have to change it?

Skickat från min SM-G950F via Tapatalk

zei20t
06-06-2017, 11:38 AM
I don't know. I cant seem to get it working on my car yet.

but I need more time to play with it when I have my trailer attached.

SA_Tig
22-09-2017, 03:11 PM
Anyone get this working on Highline in au?


I don't know. I cant seem to get it working on my car yet.

but I need more time to play with it when I have my trailer attached.

zei20t
28-09-2017, 11:45 AM
nup, sorry!

apparently its a camera related function.............

Brobbe
28-09-2017, 01:54 PM
I found this on kufatec.


Diagnostic interface trailer assist MQB VW, Audi, Seat, Skoda (https://www.kufatec.de/shop/en/diagnostic-tools/kufatec-diagnostic-coding-dongle/volkswagen-audi/diagnostic-interface-trailer-assist)


How do I know which PR no my car have?
How do I know which camera I have?
(I have 5Q0 980 556 B, but how do i know if it is KA1, KA2 or another camera?) http://www.vwwatercooled.com.au/forums/images/imported/2017/09/8110b44c9c1d60a0903977c603da628c-1.jpg

Skickat från min SM-G950F via Tapatalk

zei20t
04-10-2017, 09:05 AM
really not sure what that means

PR number? and KA1/2? perhaps email them and see what you need for a Superb...........

zei20t
20-10-2017, 08:28 AM
OK, apparently this is the camera that works

OEM 5Q0980568A Rear View Highline Camera MQB for Skoda, VW, Seat for 160.00 € - Rear View Cameras (http://www.cars-equipment.com/www/en/shop/rear-view-cameras-3/oem-5q0980568a-rear-view-highline-camera/)

and you need to load a config file into it with VCP from an Octavia III