PDA

View Full Version : Tyre pressure fault



slytrue
22-02-2017, 02:52 AM
Hi, first of all sorry for my pure English. Passat CC 2012 (1GEN)

Please help me to find a reason for my problem. Some days ago, my tyre pressure monitoring has gone..
First tyre pressure warning light comes on, but monitoring show what pressure for all wheels are good (OK). Then (that day) tyre pressure warning light turns on or off in no fixed time. And in end of the day, the tyre pressure warning light come on always, and the weirdest think is what tyre presure monitoring has gone, no longer avalable in MENU. No picture with car and no menu sub category "tyre pressure" (or somethink like that, I dont remenber how exactly it written). Then I connect VCDS, i got this faults:

VCDS Version: Release 12.12.0 (x64)


Address 17: Instruments Labels: 3C8-920-xxx-17.clb
Control Module Part Number: 3C8 920 970 P HW: 3C8 920 970 P
Component and/or Version: KOMBI H20 0420
Software Coding: 440F00
Work Shop Code: WSC 05314 115 00000
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04089 (VW46)
VCID: 3979CB6FB8AC49D693D-806C
1 Fault Found:


12658432 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 203
Mileage: 178086 km
Date: 2069.14.17
Time: 15:27:33




Tuesday,21,February,2017,17:38:02:62939
VCDS Version: Release 12.12.0 (x64)


Address 19: CAN Gateway Labels:
Control Module Part Number:
Component and/or Version:
Software Coding:
Work Shop Code:
VCID: 55A167DFBCF48DB6975-8000
3 Faults Found:


01325 - Control Module for Tire Pressure Monitoring (J502)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 204
Mileage: 178104 km
Time Indication: 0
Date: 2005.14.17
Time: 17:35:60


02001 - Data-Bus Automatic Distance Regulation
014 - Defective
Freeze Frame:
Fault Status: 01101110
Fault Priority: 1
Fault Frequency: 1
Reset counter: 203
Mileage: 178086 km
Time Indication: 0
Date: 2005.14.17
Time: 15:27:49


02001 - Data-Bus Automatic Distance Regulation
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 204
Mileage: 178104 km
Time Indication: 0
Date: 2005.14.17
Time: 17:35:55

And in "65- tire pressure - status: cannot be reached 1100" i cant connect (from gateway)

So plase tell me what a hell it is, and how I can fix it. Big THANKS

kamold
22-02-2017, 06:14 AM
The tpms module has either failed or there is a problem with the wiring.
Tpms module is behind the rear bumper.
You need to remove the rear bumper assembly.
There is a black control module about 10cm long and 3cm in diameter with a single plug attached.

Sent from my HTC 10 using Tapatalk

kamold
22-02-2017, 06:58 AM
http://www.vwwatercooled.com.au/forums/images/imported/2017/02/f43a8698766d732f55bb498af11729b0-2.jpg

It's the small black thing with wires coming from it next to the exhaust

Eaglen00b
08-03-2017, 02:04 AM
Umm.... it's not dead batteries in wheel sensors is it? I seem to recall they are fitted on the inside of the rim in the tires.....?

kamold
08-03-2017, 07:22 AM
If the wheel sensors are dead or faulty you will still be able to contact the tpms module. Just won't get a reading from the affected wheel sensor.

Sent from my HTC 10 using Tapatalk

slytrue
24-03-2017, 03:22 AM
BIG THANKS for kamold!! Like you sad all problem was for this TPMS module. I change it and now every think is ok. Thanks for your advice and for picture there is TPMS module location ;) P.S. you don`t need to remove all rear bumper, enought to unscrew 3 screws under bumper and you can easy pull out it. Sorry for my pure English ;)

kamold
24-03-2017, 04:53 AM
Great news thanks for reporting back to the forum on the outcome

Sent from my HTC 10 using Tapatalk