Log in

View Full Version : Staggered wheels on 4motion Bora



BOR444
01-06-2016, 08:17 AM
Hi, would anybody be able to shed some light if you can run a staggered wheel setup on a Bora 4motion? i ran a staggered setup on my audi S4 a few years back and didn't have any issues with the quattro system. Also will mk1 audi TT coils/suspension fit on the Boras?

Thanks you in advance,

Dev.

dylan8
01-06-2016, 06:38 PM
Suspension should fit if the tt is awd too.
Staggered wheels can be as long as the tyre rolling diameter is within a certain %. Think its 3-5%

Lloydb
01-06-2016, 08:11 PM
I would be careful as this may affect your centre diff, with a 4wd it is best to run same size front to rear

BOR444
02-06-2016, 10:39 AM
thanks guys! appreciate the opinions.

ffoff
19-07-2016, 06:28 PM
The 4 motion doesnt have a centre diff..

FYI, I ran 215/40 up front and 235/40 upfront with no issues.

PassionGarage
20-07-2016, 09:14 AM
yea I'm with ffoff i was recently running 17x7.5 215/45 up front and 17x8.5 225/45 on the rear
and I'm not sure about the centre diff but i think ffoff is right about the centre diff as well

Neroo
21-07-2016, 05:00 PM
As said before anything up to 5% is fine . Realistically you just want the rolling diameters to be the same . Have personally ran 225s on front and 245 rears without any issue. They don't really have a center diff more of a transfer case deal with a clutch in the haldex unit to regulate power going to the rear wheels.