Michael's Jetta
08-04-2016, 03:20 PM
I recently drove on a dirt road with my new Jetta, thru a national park, so I was expecting dirt and bugs etc at the end.
When I get back to town, I took it through a spray wash, but when I got home and opened the door, there was a film of dust across all the door sills & jambs, between the outer door seal and the inner seal. (so the seals kept the water spray out)
I didn't take photos and have rinsed it off, but in the photo below the red area highlighted, and attached spaces is where the dust was (and similar for all doors).
Door jamb IMAG0811.jpg (http://www.vwwatercooled.com.au/forums/attachment.php?attachmentid=22432&stc=1&d=1460092161)
This is the front bottom outer door seal
Door seal IMAG0813.jpg (http://www.vwwatercooled.com.au/forums/attachment.php?attachmentid=22433&stc=1&d=1460092161)
There is no outer seal on the front edge and that bottom seal doesn't look like it will keep anything out.
The outer seals in general don't look like they are pressed particularly tight against the sill/jamb.
Is this normal?
Is my expectation that fine bull dust should be keep out too high?
(http://www.vwwatercooled.com.au/forums/attachment.php?attachmentid=22433&stc=1&d=1460092161)
When I get back to town, I took it through a spray wash, but when I got home and opened the door, there was a film of dust across all the door sills & jambs, between the outer door seal and the inner seal. (so the seals kept the water spray out)
I didn't take photos and have rinsed it off, but in the photo below the red area highlighted, and attached spaces is where the dust was (and similar for all doors).
Door jamb IMAG0811.jpg (http://www.vwwatercooled.com.au/forums/attachment.php?attachmentid=22432&stc=1&d=1460092161)
This is the front bottom outer door seal
Door seal IMAG0813.jpg (http://www.vwwatercooled.com.au/forums/attachment.php?attachmentid=22433&stc=1&d=1460092161)
There is no outer seal on the front edge and that bottom seal doesn't look like it will keep anything out.
The outer seals in general don't look like they are pressed particularly tight against the sill/jamb.
Is this normal?
Is my expectation that fine bull dust should be keep out too high?
(http://www.vwwatercooled.com.au/forums/attachment.php?attachmentid=22433&stc=1&d=1460092161)