Page 7 of 7 FirstFirst ... 567
Results 61 to 66 of 66

Thread: Bi-Xenon Headlights for Tiguan - Retrofitting

  1. #61
    Join Date
    Jun 2012
    Location
    Maroochydore, QLD
    Posts
    572
    Users Country Flag

    Hey mate,
    Headlights - $1500
    Adapters - $90
    Auto Level + AFS - $350
    They may charge you about 700-$800 for the install in Perth as it is an expensive place
    My prices do not include GST.
    All parts are brand new. Email us info@jku.com.au for more info

    Quote Originally Posted by shoey85 View Post
    How much for complete install in wa? MY 13 TDI?

  2. #62
    Join Date
    Jun 2012
    Location
    Maroochydore, QLD
    Posts
    572
    Users Country Flag
    VW Headlights Bi-Xenon LED Installation Process Stages

    STAGE1
    - pair of complete bi-Xenon Headlights
    - new BCM high line - $300+GST - needs to end in 087 for a correct operation
    - pair of adaptors harness - 90+GST - plugs on the car are different.
    - Labour for this stage is 6 hours and the lights work but they don't do auto levelling and they don't do cornering as from the factory.

    Stage 2 - AFS and Auto Levelling
    - AFS Module with harness- $200+GST
    - Auto-Levelling sensor and harness - $200 - this mounts on the rear axle of the car and has to be run to the glovebox, fusebox and to each individual headlight. You have to install wires all over these places in the car
    - Labour is 6 hours

    Stage 3 - Headlight washers / sprinklers
    - Headlights jets and sprinklers - price to be announced as it differes at around $350-$450
    - Harness - $100+GST
    - Labour - 4 hours - take off the bumper and install the sprinklers


    This is assuming the bumper has preparation for washers and does not need to be changed like on Golf 6.
    If it does not you can cut out the holes in the bumper or simply buy a new bumper.

    The Simple headlights are easy but if you want them to work as from the factory like this and have headlight washers it is is a big job and to make sure everything works properly we need the car for 3-4 days.

    This is how the lights are meant to work after the install: VW Golf 6 Bi-Xenon LED DRL AFS and auto-levelling test afte - YouTube

    If all 3 stages are completed in one go it can be done in approximately 12 hours - saving of 4 hours and it will cost you approximately $1200.

    If the corresponding wires are connected wrongly it might damage modules and replacement of them is the costly part.

  3. #63
    Join Date
    Apr 2007
    Location
    Adelaide hills, SA
    Posts
    9,708
    Users Country Flag
    Good info thanks for posting it. I guess the point is; unless you're sure what you're doing don't attempt this as the DIY project.

    Link to complete thread.
    Last edited by Transporter; 04-01-2014 at 09:27 AM.

  4. #64
    Join Date
    Jun 2012
    Location
    Maroochydore, QLD
    Posts
    572
    Users Country Flag
    After the install:
    LED 100% brightness

    Main Beam + LED

    High Beam

    LED 50%+Indicator

  5. #65
    Join Date
    May 2012
    Location
    Sydney, NSW
    Posts
    21
    Users Country Flag
    Stupid question but how does one change the LED's between 50% and 100% or is the done through coding

  6. #66
    Join Date
    Jun 2012
    Location
    Maroochydore, QLD
    Posts
    572
    Users Country Flag

    Its not a stupid one.

    Coding is the main thing

    When you have your indicator on, if the LEDS stay at 100% the indicator is almost non visible. Hence VW decided to either switch off the LEDS like in US&A or dim them to 50%

    Quote Originally Posted by Pickles View Post
    Stupid question but how does one change the LED's between 50% and 100% or is the done through coding

Page 7 of 7 FirstFirst ... 567

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |