Results 1 to 5 of 5

Thread: MK4 1.8T IE Inlet pipe/big port inlet mani/660cc injectors/fuel rail/DBC TB c/control

  1. #1

    MK4 1.8T IE Inlet pipe/big port inlet mani/660cc injectors/fuel rail/DBC TB c/control

    IE Silicone TIP, as new, never opened $150



    AGU (big port) inlet manifold, freshly bead blasted, with a repair to the rightmost lower mounting bolt boss $75


    VDO Siemens AGU DBC throttle body 06A133063F with approx. 10k use. This is the cruise control version that was replaced (hence the relatively new condition) after I started getting idle problems. $150


    Standard AGU fuel rail with 4 bar FPR 75$





    4 off Siemens DEKA IV 660cc injectors, used for 600kms before I swapped out to an IE inlet mani/fuel rail/longer injectors $225



  2. #2
    Join Date
    Sep 2013
    Location
    nsw
    Posts
    3,211
    Users Country Flag
    PM'd you re the IE TIP mate!!

  3. #3
    Join Date
    Nov 2012
    Location
    WA
    Posts
    535
    Users Country Flag
    Damn I would have been interested in that TIP as well.
    08 9n3 Polo GTI
    Mods: heaps

  4. #4
    Join Date
    Sep 2013
    Location
    nsw
    Posts
    3,211
    Users Country Flag
    mate I just need to know if its an 80mm at the top to accept a 3in MAF?

  5. #5

    its 2 3/4 inch at the MAF or 70mm.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |