Results 1 to 6 of 6

Thread: Coolant leak from drives side of engine 1.8t

  1. #1
    Join Date
    Aug 2006
    Location
    Sydney
    Posts
    1,560

    Coolant leak from drives side of engine 1.8t

    did some searching but seems like the comon coolant leaks from the 1.8T is from the coolant flange near the shifter and the Y pipe near the coolant bottle...

    iv got a slow leak from the right side of the engine (drivers side).. drips onto the right side of the oil pan..
    any ideas on what is above that?

    iv checked the hoses going from the bottle and all seem fine and no pink dryed coolant around.

    very hard to see because it doesnt leak hard enough...
    Passat 1.8T K04 | Audi A3 1.8T | Bora 4Motion

  2. #2
    Join Date
    Mar 2013
    Location
    Brisbane QLD
    Posts
    1,304
    Users Country Flag
    water pump very common on them....look at the bottom of the cambelt cover near the sump...there is a black metal trim thats near the crank...usually drips off there......VDUB...
    VOLKSWAGEN TECHNICIAN - 16 YEARS OF PAIN..
    VCDS CODING- FAULT DIAGNOSIS - PRE PURCHASE INSPECTIONS- REPAIRS
    9W2 BT KITS -$300 - 9W7 BT KITS - $450 - CANBUS UPGRADE $150
    BRISBANE / GOLD COAST

  3. #3
    Join Date
    Aug 2006
    Location
    Sydney
    Posts
    1,560
    Thread Starter
    thanks.. yeh i can see it drip off that cover!

    damn i only changed my water pump about 50,000k's ago..
    is there a way to test it is the pump for certain? like applying pressure somehow?

    been reading the thermostat housing and o-ring can fail too.. but havn't checked the location of that yet
    Passat 1.8T K04 | Audi A3 1.8T | Bora 4Motion

  4. #4
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,521
    Users Country Flag
    Depends on the quality of the water pump, though.

    Thermostat housing is in behind the alternator, from memory. Pretty sure it's plastic, so it'll be prone to a warped and leaking flange.
    '07 Transporter 1.9 TDI
    '01 Beetle 2.0

  5. #5
    Join Date
    Mar 2013
    Location
    Brisbane QLD
    Posts
    1,304
    Users Country Flag
    best way would to pull off the cambelt covers just to make sure before you pull off the belt
    VOLKSWAGEN TECHNICIAN - 16 YEARS OF PAIN..
    VCDS CODING- FAULT DIAGNOSIS - PRE PURCHASE INSPECTIONS- REPAIRS
    9W2 BT KITS -$300 - 9W7 BT KITS - $450 - CANBUS UPGRADE $150
    BRISBANE / GOLD COAST

  6. #6
    Join Date
    May 2017
    Location
    South walsh
    Posts
    2
    Users Country Flag

    I can get the aluminum coolant flanges and aluminum water pump for 1.8T

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |