Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: T5.1 DMF Cost

  1. #1
    Join Date
    Feb 2009
    Location
    Lake Cathie, NSW, 2445
    Posts
    20

    T5.1 DMF Cost

    Morning all. I have a 2010 T5.1 bi turbo 4 motion 7spd DSG. It has had a rattle in the drive line when downshifting for a long period but is getting worse. Local Dealer diagnosed DMF failing and quoted $4300 parts and labour. Can anyone tell me if that is excessive or close to the mark ? Also does anyone know of a VW specialist on NSW north coast who handles this type of work. I have little faith in the local Dealer but not a lot of options. Cheers

  2. #2
    Join Date
    Oct 2008
    Location
    Mt Cotton
    Posts
    3,727
    Well that's a first for me an auto with a dual mass flywheel , I thought all manuals had the DMF and the DSG was a semi automatic with no need for the DMF . I just googled that and yes the clutches are bolted to a DMF , seems VW want owners to suffer even more these days with another expensive hit to the hip pocket when their smart ideas go belly up . Out of interest have you had the drive shafts checked ? My manual T5 had rattles so to speak in shift changes and the splines were the problem , apparently the toffee composition of the splines wont last long . Might be an idea to get a second opinion .Normally when the DMF is dodgy it is very hard to reverse up a hill , my DMF has been buggerd for over 10 years nearly . I only learnt about the mongrel DMF AFTER I changed the clutch plate etc so I was not prepared to pull the bloody gear box out a second time so I kept driving and driving and driving . So now with over 300000 km on the clock its still in there shuddering in reverse but some clever slipping of the clutch will get me out of any situation I may be silly enough to drive into
    T5.1 DMF Cost-stub-jpg
    Last edited by Sunny43.5; 09-01-2017 at 04:09 PM.

  3. #3
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,521
    Users Country Flag
    It's a DSG. They all have DMFs, because they're a manual gearbox once you take the electronics away.

    I'd say that sounds about right for dealer pricing. Front subframe needs to be dropped and the engine supported (not easy without the factory jig), before the gearbox can be removed. DMF on it's own is around $2K.

  4. #4
    Join Date
    Feb 2009
    Location
    Lake Cathie, NSW, 2445
    Posts
    20
    Thread Starter
    Thanks for the advice guys, looks like a booking with our local dealer. Interestingly Sunny43.5 the DSG does vibrate or lightly shudder backing up an incline especially after a long run. Cheers

  5. #5
    Out of interest have you had the drive shafts checked ? My manual T5 had rattles so to speak in shift changes and the splines were the problem , apparently the toffee composition of the splines wont last long .

    Hey sunny43.5, are the shafts on the dsg box troublesome aswell? Or just the manual box.

  6. #6
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,521
    Users Country Flag
    The splines wear away, as it's bare metal on bare metal.

    When replacing the stub shafts, you're meant to apply some grease to the splines.

  7. #7
    So would you recommend greasing them as part of a major service?

  8. #8
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,521
    Users Country Flag
    If it were quick and easy, yeah I guess so.

    But it's not. Whole driveshaft need to come out though.

  9. #9
    Yeah I seen that the last time I had mine on the hoist but if it saves a stub breaking it might be worth it.

  10. #10
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,521
    Users Country Flag

    If I have the shaft out for whatever reason, I generally throw a bit of grease on the splines and leave it at that.

    If you were pulling the shaft out specifically to grease it, you'd only need to do it once.

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |