Support VWWC

Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Brake bleeder nipple wrench size??

  1. #1
    Join Date
    Oct 2006
    Location
    Albany Creek Brisbane
    Posts
    151

    Brake bleeder nipple wrench size??

    Hi

    I have been doing some maintenance on my cars lately and I want to bleed the brakes

    I cannot work out what size wrench to use on the brake bleed nipple it seems to be between wrench sizes - any ideas?

    I can use an adjustable wrench but it is a bit tight and awkward using this method. Where can you buy replacement brake nipples incase I break one off in the process they seem pretty tight

    Thanks

  2. #2
    Join Date
    Sep 2009
    Location
    .
    Posts
    298
    Never use a shifter on those, there's a reason shifters are nicknamed nut ****ers!

    Same goes with the open end of a spanner, dont use it!

    Best way i find is to crack it with either the ring end of a good quality spanner or a good quality socket. Then put the ring end of the spanner over the nipple followed by the hose you are using to bleed the caliper. Finishing up is the reverse of this.

    If you have 6 sided sockets these are less likely to round a dying or not perfect bleed nipple as they tend not to round things off.

    Or you could get a proper slotted brake nut tool thingo from most auto shops.

    As for size My R32 brakes are 6mm if my memory serves me correctly, and the others were either 8mm or 10mm. They will be metric though.

    Just for the love of all that is holy DONT use a shifter or an open end of a spanner on it!!!!!!

  3. #3
    Join Date
    Aug 2009
    Location
    Victoria
    Posts
    1,788
    I swear I used 11mm yesterday on the rears.

  4. #4
    Join Date
    Sep 2009
    Location
    .
    Posts
    298
    I could quite possibly be wrong about the sizes! but im 99.9% sure they'll be metric

  5. #5
    Join Date
    Sep 2009
    Location
    Chillaxing in Tas
    Posts
    1,335
    Users Country Flag
    think my rears where 9mm, and front 11mm

    I knew it was a size i didnt have as a spanner
    <space for rent>

  6. #6
    Join Date
    Dec 2007
    Location
    Somewhere in Melbourne, Victoria
    Posts
    206
    Users Country Flag
    depends on the make of the parts used. I had 8 mm nipples on the rear brake cylinders and 11mm nipples on the front discs.

    Agree with everyone here on a few items (and a few I added from experience):
    1. Open ended and shifters are the worst thing you can use when bleeding brakes;
    2. Yes ze Germans used metric exclusively, unless some muppet put on other fasteners;
    3. Invest in a bleeding kit that has a clear hose, thats how you can easily see that no air is in the lines;
    4. overpurchase your brake fluid so you can make sure you don't run out, and finally;
    5. top up the reservoir regularly to ensure you aren't putting more air into the system.
    1991 Golf GTI Manual - Tornado Red (Little Red Wagen)
    1998 Golf Cabriolet Manual - Black Magic Pearl (aka Rommel's Panzer) Deceased/written off
    1993 Golf Cabriolet Manual - Alpine White (aka Hitler Youth Wagen) Deceased/written off
    1976 Golf LS Manual - Bronco Brown (aka Roadrunner) Deceased/worn out

  7. #7
    Join Date
    Oct 2006
    Location
    Albany Creek Brisbane
    Posts
    151
    Thread Starter
    Where do you buy replacement brake nipples? I think I have overtightened and nearly broken the drivers side rear one

    Thanks

  8. #8
    Join Date
    Oct 2005
    Location
    Queensland
    Posts
    59
    There are dedicated pipe spanners that are designed to do the job without wrecking the nipples and hose connections

  9. #9
    Join Date
    Jun 2011
    Location
    Sydney NSW
    Posts
    1,143
    Users Country Flag
    As others have said, DON'T use anything other than a special spanner when working on brakes.

    For working on brake pipe fittings, you need to use the correctly sized "split ring" spanners. A normal open ended spanner will see you round the corners off the fitting. The "split ring" spanner is essentially a ring spanner with a small part taken out to get it past the brake tube. The ring of the spanner is also thicker to resist flexing.

    If you don't have the correct spanner and cannot get one, then take it to a brake service specialist and get it done there.
    Last edited by wai; 30-08-2011 at 07:41 AM.

  10. #10
    Join Date
    May 2005
    Location
    Gosford Central Coast NSW
    Posts
    4,386

    I think open ended spanners are just fine as long as you or someone else hasnt over-tightened the fitting already. then you need the split ring spanner.

    On mk1's, Ive seen all of 7,8,9,11,12 and 14mm bleed nipples.
    '07 Touareg V6 TDI with air suspension
    '98 Mk3 Cabriolet 2.0 8V
    '99 A4 Quattro 1.8T

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |