Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Polo Power steering problem!!!

  1. #21
    Join Date
    May 2008
    Location
    Erskineville, NSW
    Posts
    7,578
    Users Country Flag

    There are quite a few threads about it. maybe do a bit more searching?

    You'll probably find there is corrosion on both ends of the battery earth & positiveve cables. Also corrosion on the wiring going into the power steering and corrosion on the wires & relay / fuse terminals in the box at the front right. Possibly the fuses/ relays are beyond help & need replacement. They all need to be cleaned - maybe check for resistance with an ohm meter.
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

  2. #22
    Join Date
    Mar 2007
    Location
    Gold Coast
    Posts
    738
    Users Country Flag

    My earth lead was knackered. Check that you have the same voltage across the 2 battery terminals as you do from the positive battery terminal to somewhere on the car body. (as per post above this could be a corrosion issue as well, but my lead was stuffed)

Page 3 of 3 FirstFirst 123

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |