Is that model the 288mm diameter x 25mm thick with 5 stud x 100mm PCD hubs?
I think you'll find it's a DBA802 (plain face) or DBA802S (slotted) Get DBA to check the PCD is right.
DBA803 are 232x9 which is probably the rear rotor...
Hi everyone,
Just got my daughter back into an 07 GTI. We had one years ago.
It needs front rotors but I'm getting conflicting info from Brakes Direct, DBA and Sparesbox.
Brakes Direct seem to think the dba803s suits the 9n3 GTI whereas Sparesbox and DBA both say no.
Those of you that have fitted T2's previously, what part number was used?
Thanks in advance.
Is that model the 288mm diameter x 25mm thick with 5 stud x 100mm PCD hubs?
I think you'll find it's a DBA802 (plain face) or DBA802S (slotted) Get DBA to check the PCD is right.
DBA803 are 232x9 which is probably the rear rotor...
carandimage The place where Off-Topic is On-Topic
I used to think I was anal-retentive until I started getting involved in car forums
yep you need 288mm, 5 x 100 pcd. I have DBA T2's (slotted) on my car so I know they fit.
Fitted DBA802S to my sons's Polo GTi earlier this year.
Bookmarks